MillerCoors LLC

Employees were installing a new belt and buckets in a grain elevator. Two employees were struck by the belt and bucket assembly as it was being installed by crane when the rigging gave way. The first employee was hospitalized for a broken leg. The second employee sustained nerve damage to an arm and was hospitalized.

An employee was jogging a machine to verify a preventative maintenance task had been completed when his fingers were pinned between the machine's belt and pulley. He suffered fractures to the topmost joints of his right index and ring fingers, requiring hospitalization.

An employee was repairing an electrical part on a turning machine when he came into contact with the exposed, 480-volt live electrical part, resulting in an electric shock on his right hand. The machine was not locked/tagged out at the time.

An employee suffered a hand crushing injury requiring surgery and hospitalization while cleaning the filter press.

An employee tripped on a process pipe in the aging cellar and fell to the floor, sustaining a broken hip.

An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.

An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.

An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.

An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.

An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.

An employee was adjusting a conveyor belt with a tool. The belt broke, causing the tool to fly back and lacerate the employee's head.

An employee was carrying a bucket of acid to his workstation for cleaning purposes. He slipped and fell, and the acid spilled into his eyes. He suffered eye injuries and was hospitalized.

Two maintenance workers were troubleshooting an actuator. They removed the end covers to check for air leakage around the piston head. When they connected an air hose to the side of the actuator and applied pressure, the piston head blew out of its housing. It struck one of the employees in the chest, causing the employee to fall to the ground. The employee suffered an abdomen contusion, resulting in a laceration to the liver, and was hospitalized.

On March 25, 2025, an employee was closing the hurricane-rated sliding door and pinched her right index finger between the door and the doorframe, resulting in a fingertip amputation.

An employee was troubleshooting a machine when he slipped and went to brace himself. His hand entered the machine and the blade contacted his finger, resulting in a fingertip amputation.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.