Direct exposure to electricity, greater than 220 volts · Electrocutions, electric shocks
At a glance
Federal OSHA recorded a severe workplace injury
at MillerCoors LLC, 18901 W. 32nd Ave., GOLDEN, COLORADO 80401
on — Electrocutions, electric shocks, affecting the bODY SYSTEMS.
Final narrative
An employee was repairing an electrical part on a turning machine when he came into contact with the exposed, 480-volt live electrical part, resulting in an electric shock on his right hand. The machine was not locked/tagged out at the time.
HospitalizedBODY SYSTEMSSpecial process machinery, unspecified
Employees were installing a new belt and buckets in a grain elevator. Two employees were struck by the belt and bucket assembly as it was being installed by crane when the rigging gave way. The first employee was hospitalized for a broken leg. The second employee sustained nerve damage to an arm and was hospitalized.
An employee was jogging a machine to verify a preventative maintenance task had been completed when his fingers were pinned between the machine's belt and pulley. He suffered fractures to the topmost joints of his right index and ring fingers, requiring hospitalization.
An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.
An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.
On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.
An employee was carrying a bucket of acid to his workstation for cleaning purposes. He slipped and fell, and the acid spilled into his eyes. He suffered eye injuries and was hospitalized.
Two maintenance workers were troubleshooting an actuator. They removed the end covers to check for air leakage around the piston head. When they connected an air hose to the side of the actuator and applied pressure, the piston head blew out of its housing. It struck one of the employees in the chest, causing the employee to fall to the ground. The employee suffered an abdomen contusion, resulting in a laceration to the liver, and was hospitalized.
On March 25, 2025, an employee was closing the hurricane-rated sliding door and pinched her right index finger between the door and the doorframe, resulting in a fingertip amputation.
An employee was troubleshooting a machine when he slipped and went to brace himself. His hand entered the machine and the blade contacted his finger, resulting in a fingertip amputation.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.