REEDSBURG, WISCONSIN—
American Axle & Manufacturing, Inc.
Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at American Axle & Manufacturing, Inc., 700 Ash Street, REEDSBURG, WISCONSIN 53959 on — Heat (thermal) burns, unspecified, affecting the ankle(s) and leg(s), n.e.c..
Final narrative
An employee was standing on the floor removing a sample of molten iron from a furnace. The sample cup became caught on the lip of the furnace and molten iron spilled onto the employee's aluminized pants, contacting his leg through a pocket opening. He received burns to the thigh, calf, and ankle.
More severe injuries at American Axle & Manufacturing, Inc.
TWINSBURG, OHIO—
American Axle & Manufacturing, Inc.
An employee was installing an arm on a crossbar. The employee crouched down to get the pin that would lock the arm in position. The arm fell and severed the employee's left thumb.
BROWNTOWN, WISCONSIN—
American Axle & Manufacturing, Inc.
An employee was moving an 800-pound core box with a hoist. As the box was lowered, it slid off the hoist hook and struck the employee's ankle, breaking it.
TWINSBURG, OHIO—
American Axle & Manufacturing, Inc.
While operating a motorized walk-behind pallet jack, an employee's hand was caught between the handle of the machine and a shelf. This resulted in a fracture to the right-hand pinky finger and dislocated right thumb, requiring subsequent surgery.
REEDSBURG, WISCONSIN—
American Axle & Manufacturing, Inc.
An employee was dumping a hopper when the hopper slid and amputated one of his fingertips.
View American Axle & Manufacturing, Inc.'s full OSHA safety record →
Similar incidents · Same event type
BAY CITY, TEXAS—
OQ Chemicals
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
HAUPPAUGE, NEW YORK—
Husbe Zoaq
An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.
FORT WORTH, TEXAS—
The Cumberland Rest Inc. dba Trinity Terrace
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
SAN ANTONIO, TEXAS—
Mueller & Wilson Inc
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
MADILL, OKLAHOMA—
Oklahoma Steel & Wire Co., LLC
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 331511)
BENTON, PENNSYLVANIA—
Benton Foundry, Inc.
An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.
BIRMINGHAM, ALABAMA—
American Cast Iron Pipe Company
An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.
BLYTHEVILLE, ARKANSAS—
NIBCO INC.
An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.
PRYOR, OKLAHOMA—
American Castings, LLC
An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.
JACKSON, OHIO—
OSCO Industries Inc.
An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.