Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Florida Power and Light, Pratt and Whitney Across, JUPITER, FLORIDA 33478
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Watch Florida Power and Light — freeGet an email when a new federal OSHA severe-injury report for Florida Power and Light is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was moving a crane and outriggers when his middle finger was pinched between the lip of an outrigger and the crane, resulting in a partial amputation.
An employee was working on an out-of-service electrical pole. While he was up the pole on a ladder, and then on hooks, his hand touched with a primary voltage jumper that had burnt off at the transformer. He suffered an entry wound through the little finger and out the back of his arm behind the elbow.
An employee was in the rear of the property looking for an electric service handhole. The employee stepped onto a plastic stool bench in order to see over the fence. The employee lost his balance and suffered a puncture injury underneath the armpit from climbing spikes protruding from a communications pole.
An employee was attempting to undo a sling between a crew material handler truck that was struck in the mud and a four-wheeled pickup truck that was pulling the crew material handler truck when the four-wheeled truck rolled back, pinning his right leg. He suffered lacerations, punctures, and a damaged main artery behind his right knee, requiring hospitalization.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 221112)
Employees were pulling three-phase power lines to a power pole. An employee's hand was caught between a pulley and a rope, resulting in amputation of the employee's index, middle, and ring fingertips.
An employee was cutting through two secondary wires with a battery-powered cutting tool. The wires were energized at 120/240 volts; when the employee cut through the insulation around a wire, an arc flash burned the employee's left thumb.
An employee had been preparing material for a lineman at a jobsite and was pulling up wire on a hand line. The employee began to feel ill, suffering from heat illness.
An employee was tamping at the base of a power pole when they were struck by an extendable hot arm that was dropped from an aerial bucket. The employee sustained two broken ribs on the right side, and a pneumothorax on the right side.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.