Caught in running equipment or machinery, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Hart Design & Mfg Inc, 1940 Radisson Street, GREEN BAY, WISCONSIN 54302
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was testing the assembly of a blade part on food processing equipment. He was leaning on a chest-high conveyor while his left hand was between the conveyor and the blade when the blade toggle switch was turned on. The blade then cut and amputated his left index finger and thumb.
AmputationFinger(s), fingernail(s), n.e.c.Food and beverage processing machinery-specialized, unspecified
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 333241)
On July 16, 2025, at 5:20 p.m., an employee in training was cleaning a machine that makes dough balls when the machine turned on and injured three fingers on his right hand, including a fingertip amputation on the middle finger.
An employee was feeding a roller into a pipe polishing machine when his glove was caught by the machine. The abrasive belt caused a 3-4" laceration to the top of his right wrist which exposed bone. The employee was hospitalized and required surgery.
An employee was cleaning a chicken neck skinning machine when they noticed chicken skin was stuck on a piece of the machinery. The employee removed the piece of excess skin and their left index finger got caught in the equipment, resulting in a fingertip amputation.
An employee was running diagnostics on a machine when he slipped on dust in the surrounding area. As he caught himself, his finger was caught between the machine's moving chain and sprocket. His right index fingertip was amputated.
On September 4, 2024, an employee was lifting a 4-inch x 4-inch wood post that was 16 feet long and weighed 50 pounds when they felt a pop in their abdomen. The employee was hospitalized.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.