Fall on same level, unspecified · Fractures and dislocations
At a glance
Federal OSHA recorded a severe workplace injury
at TRIDENT BUILDING SYSTEMS, INC., 2812 Tallevast Rd, SARASOTA, FLORIDA 34243
on — Fractures and dislocations, affecting the elbow(s).
Final narrative
An employee was standing on the ground using an overhead crane to move small light beams from a conveyor to a
staging area when the stack of beams became unstable and started to fall over. As he attempted to get out of the way of the falling beams, he fell to the ground, dislocating/fracturing his left elbow. He was hospitalized and had surgery.
HospitalizedElbow(s)Floor, n.e.c.
More severe injuries at TRIDENT BUILDING SYSTEMS, INC.
On January 20, 2020, an employee was at a residence removing a fan unit from the sidewall while on a scissor lift. He lost his balance and fell 8 feet from the lift to the floor, hitting his head. He suffered several facial and head lacerations and a skull fracture.
A rigging crew was adjusting the straps of an 800 lb. steel beam member being lifted as part of a steel building construction when the beam clamp slipped and the beam fell, striking an employee who was checking rigging nearby on his back. He suffered broken ribs and lacerations.
An employee was putting a strap around a steel beam when another beam shifted and fell on his right hand, fracturing his right wrist and breaking fingers.
An employee was walking behind the store with another associate to get paperwork from the delivery driver when she fell on the walkway and sustained a leg fracture that required surgery.
An employee was adjusting the forks on a forklift when a fork detached from the forklift. The employee jumped out of the way but fell on the concrete floor. The employee was hospitalized with a broken hip.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
Two maintenance employees were dismantling a machine part (steel cylindrical rollers) on the ground. After unbolting a portion, part of the assembly fell approximately 6 inches onto one employee's left little finger. The employee was hospitalized and about 3/4" of their little finger above the top joint was surgically amputated.
An employee was moving and handling cardboard boxes when he sustained a laceration to his left ring finger from a box. The laceration became infected and required hospitalization and surgery.
An employee was positioning a piece of metal trim for a test bend in a single-fold bend machine. Their right middle fingertip was pinched by a clamp on the machine, resulting in a partial amputation.
An employee was operating a double folding machine and positioning a piece of metal trim in the folding clamps for a test bend. The machine activated and the crank (lower control arm that bends the trim) came up and cut through the employee s glove, amputating their right middle fingertip.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.