Art Headquarters LLC

An employee was cutting wood molding on an industrial chop saw. He was using a piece of wood to push out another piece of wood when he felt dizzy and lost balance. He moved forward, pushing the foot pedal down, and the saw blade lacerated his left hand.

An employee was operating a band saw when his right little fingertip was amputated.

An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.

An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.

An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.

An employee was using a shaper to cut wood when their right hand contacted the blade, resulting in a partial amputation to the right ring finger.

A building engineer was inspecting a generator. As he closed the generator enclosure door, his right ring finger was caught between the door and the door frame. The fingertip was amputated.

An employee was planing lumber on a jointer. While he was feeding the workpiece into the jointer, it hung up and he lost his grip on it. His gloved hand came into contact with the point of operation, and his left little finger was partially amputated near the first joint.

An employee was on an extension ladder cleaning an outdoor dryer duct when he fell to the concrete ground. The employee sustained two brain bleeds, punctured lungs, fractures to their hip, tibia, face, vertebrae, left wrist, shoulder, and upper arm, as well as an open fracture to the arm.

An employee was in an elevator pit working on the hoisting cables and compensator sheave. He moved the cables back onto the sheave groves. One of the cables spun, twisted out of the grove, grabbed his glove, and pulled his hand into the sheave. The tip of his right thumb was caught under a cable and was amputated approximately at the knuckle just below the nail.

An employee had used cleaning solvent to clean the engine room. The employee turned on a vacuum, which caused an explosion to occur, followed by a fire. The employee was hospitalized with second-degree burns.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.