LINCOLN, NEBRASKA—
Lincoln Industries
Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Lincoln Industries, 600 West E Street, LINCOLN, NEBRASKA 68522 on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was loading sprockets in the load station when a pneumatic malfunction occurred and the employee's left thumb was pinched, resulting in a partial amputation with tuft exposure/fracture.
More severe injuries at Lincoln Industries
LINCOLN, NEBRASKA—
Lincoln Industries
An employee was performing tack welding on fittings when their shirt caught fire, resulting in third-degree burns to their chest and abdomen.
LINCOLN, NEBRASKA—
Lincoln Industries
An employee was operating a lathe machine. Their left arm was caught in the machine resulting in a forearm fracture.
LINCOLN, NEBRASKA—
Lincoln Industries
An employee was completing maintenance to adjust a plating barrel on a saddle. The employee reached over the drive shaft and their shirt became caught in the shaft. As the employee reached to dislodge their shirt, the employee's glove became caught in the drive shaft, causing amputation of the right ring and little fingers.
LINCOLN, NEBRASKA—
LINCOLN INDUSTRIES
Three employees were moving a cabinet through a storage room. The cabinet bumped a cart holding a rack; the rack began to teeter, then fell and struck one employee's right hand while it was on the handle of the cart. The employee's right little finger was medically amputated at the knuckle.
LINCOLN, NEBRASKA—
LINCOLN INDUSTRIES
An employee was operating a hydraulic press and attempting to remove a cut piece of metal when the machine was actuated and amputated his left index and middle fingertips.
View Lincoln Industries's full OSHA safety record →
Similar incidents · Same event type
CULLODEN, WEST VIRGINIA—
Service Wire Company
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
OMAHA, NEBRASKA—
Oriental Trading Company, Inc.
An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.
MCALLEN, TEXAS—
Fox Packaging
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
SALTILLO, MISSISSIPPI—
Ashley Furniture Industries, Inc.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
BEDFORD HEIGHTS, OHIO—
ITW Bedford Wire
An employee's right hand was caught in a wire drawing machine, resulting in amputation.
More severe injuries in this industry (NAICS 332813)
PUNXSUTAWNEY, PENNSYLVANIA—
BFG Manufacturing
An employee placed an aluminum step ladder beside a tractor trailer and was removing a piece of scrap aluminum from the trailer that resulted from a motor vehicle accident. While coming down the ladder, the employee fell approximately 6 feet to the concrete. The employee was hospitalized with a fractured T4 vertebra.
WALBRIDGE, OHIO—
MSC Walbridge Coatings Inc.
On August 26, 2025, an employee was repairing a pipe at a tank. The employee fell and slid down the tank, suffering severe lacerations to the lower arms. The employee was hospitalized.
CHICAGO, ILLINOIS—
GATTO INDUSTRIAL PLATERS, INC.
On August 26, 2025, a temporary employee was assisting a mechanic. The employee was on an overhead crane, removing a chain hoist attachment over a large plating tank. When the platform of the crane was moved, the employee became caught between the platform's railing and a support beam. The employee sustained a punctured lung and fractures to their clavicles, humerus, and ribs.
NIAGARA FALLS, NEW YORK—
Precious Plate, Inc.
An employee was adding an all purpose soak and electro cleaner chemical to a water tank to make a cleaner bath. An exothermic reaction caused the 200 F water to splash on him, and he suffered hot water and steam burns to the right side of his face, his upper right arm, the right side of his torso, and his right leg.
SYRACUSE, NEW YORK—
Anoplate Corporation
At 3:00 AM, on 2/18/2025, an employee was mixing chemicals. The employee had difficulty breathing due to inhalation of unknown chemicals. The employee was hospitalized.
More severe injuries in NEBRASKA
NEBRASKA CITY, NEBRASKA—
Concrete Industries Nebraska City
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
OMAHA, NEBRASKA—
Elkhorn Mechanical and Combustion
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
LINCOLN, NEBRASKA—
4 Seasons Property Services, Inc.
An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.
KEARNEY, NEBRASKA—
Cellar Crew LLC
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
ELGIN, NEBRASKA—
BANB Farms Inc.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.