105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

LINCOLN INDUSTRIES

Struck by falling object or equipment, n.e.c. · Amputations

Federal OSHA recorded a severe workplace injury at LINCOLN INDUSTRIES, 600 WEST "E" STREET, LINCOLN, NEBRASKA 68522 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..

Three employees were moving a cabinet through a storage room. The cabinet bumped a cart holding a rack; the rack began to teeter, then fell and struck one employee's right hand while it was on the handle of the cart. The employee's right little finger was medically amputated at the knuckle.

Amputation Finger(s), fingernail(s), n.e.c. Racks-garment and other

Lincoln Industries

An employee was performing tack welding on fittings when their shirt caught fire, resulting in third-degree burns to their chest and abdomen.

Lincoln Industries

An employee was operating a lathe machine. Their left arm was caught in the machine resulting in a forearm fracture.

Lincoln Industries

An employee was completing maintenance to adjust a plating barrel on a saddle. The employee reached over the drive shaft and their shirt became caught in the shaft. As the employee reached to dislodge their shirt, the employee's glove became caught in the drive shaft, causing amputation of the right ring and little fingers.

LINCOLN INDUSTRIES

An employee was operating a hydraulic press and attempting to remove a cut piece of metal when the machine was actuated and amputated his left index and middle fingertips.

Lincoln Industries

An employee was loading sprockets in the load station when a pneumatic malfunction occurred and the employee's left thumb was pinched, resulting in a partial amputation with tuft exposure/fracture.

View LINCOLN INDUSTRIES's full OSHA safety record →

Performance Contractors, Inc.

An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.

WIRECO WORLDGROUP, INC.

An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.

Owens & Minor - Pittsburgh Distribution Center

The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.

Retro Tech Systems

Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.

Creston Energy Group

An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.

BFG Manufacturing

An employee placed an aluminum step ladder beside a tractor trailer and was removing a piece of scrap aluminum from the trailer that resulted from a motor vehicle accident. While coming down the ladder, the employee fell approximately 6 feet to the concrete. The employee was hospitalized with a fractured T4 vertebra.

MSC Walbridge Coatings Inc.

On August 26, 2025, an employee was repairing a pipe at a tank. The employee fell and slid down the tank, suffering severe lacerations to the lower arms. The employee was hospitalized.

GATTO INDUSTRIAL PLATERS, INC.

On August 26, 2025, a temporary employee was assisting a mechanic. The employee was on an overhead crane, removing a chain hoist attachment over a large plating tank. When the platform of the crane was moved, the employee became caught between the platform's railing and a support beam. The employee sustained a punctured lung and fractures to their clavicles, humerus, and ribs.

Precious Plate, Inc.

An employee was adding an all purpose soak and electro cleaner chemical to a water tank to make a cleaner bath. An exothermic reaction caused the 200 F water to splash on him, and he suffered hot water and steam burns to the right side of his face, his upper right arm, the right side of his torso, and his right leg.

Anoplate Corporation

At 3:00 AM, on 2/18/2025, an employee was mixing chemicals. The employee had difficulty breathing due to inhalation of unknown chemicals. The employee was hospitalized.

Concrete Industries Nebraska City

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

Elkhorn Mechanical and Combustion

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

4 Seasons Property Services, Inc.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

Cellar Crew LLC

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

BANB Farms Inc.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.