Gates Corporation

Two maintenance technicians were changing out drive belts on the south end of the vulcanizing vessel. To check the proper function of the drive belts, the technicians manually cycled the cars into and then out of the vessel. One technician was manually cycling the vessel back out and the injured technician was inspecting the belts and checking the tension. The injured technician's right index finger was pinched between the belt and the pulley, resulting in an amputation of the distal phalanx.

An employee was cleaning a mandrel shaft with an emery cloth when their glove became caught on the rotating shaft. Their right hand was pulled in with the glove and their thumb was amputated.

On February 20, 2024, at approximately 6:30 a.m., an employee was unjamming rubber that had become stuck in a machine. When the machine started, the flapper moved, striking and compressing the employee. The employee was hospitalized for three fractured ribs, a partially collapsed lung, and a puncture wound in the middle of their back.

An employee was operating a hose/bender machine. He was reaching to adjust a piece of hose and got caught in a pinch point, sustaining an amputation to his finger.

On 8/9/2023, an employee was pressure washing a mandrel shell when the pressurized mixture lacerated their right hand near the thumb. The employee was hospitalized.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

An employee was preparing to cut rubber stock on a pneumatic cutting machine when their middle and ring fingertips were amputated by the cutting blade.

At about 12:25 a.m. on September 3, 2025, an employee was troubleshooting a malfunction involving a slitter whose arbor was not rotating as expected. The employee was observing the slitter's operations when the arbor completed its cycle and the employee's right index finger was drawn into the slitter's 4-inch, non-rotating cutting blade. The fingertip was amputated.

An employee was operating a rolling rope machine. Tooling fell out of the machine and landed on the employee's foot, breaking bones. The machine was not guarded at the time.

An employee was operating a machine when hot air and water was released. The employee sustained burns to the neck, back, buttocks and leg on the right side.

An employee was operating a slitter machine when the roller bar amputated the tips of their right middle, ring and little fingers.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.