Team Industries, Inc.

An employee was using a paint brush to touch the side of a spool that another employee was loading onto a trailer using an overhead crane when the spool (12 feet long with a 12-inch diameter) caught another spool on the trailer. This caused the other spool, to fall off the trailer and strike the employee's left foot, fracturing it.

An employee was hydrostatically testing a pipe when the hydro plug was ejected, striking and breaking her leg. She was hospitalized.

On August 23, 2016, an employee was welding a custom pipe when a gear or piece of the turn table failed and a pipe fell, crushing the employee's leg and lacerating a muscle.

An employee was patrolling a store using an electric patrol scooter when they lost their balance and sustained an ankle fracture.

An employee was operating a forklift to move panels around the dock area when the vehicle struck a joint where the two floors meet. The employee lurched forward and struck his head on the steering wheel. The employee then fell from the vehicle and sustained a dislocated disc in their back, requiring hospitalization.

An employee was standing inside a semi-trailer when the driver of the semi-trailer pulled away, causing the employee to fall backward and strike their head on a steel dock plate. The employee suffered a skull fracture, a fractured L1 vertebra, a broken coccyx, a laceration/abrasion to the head, and a brain bleed.

An employee was riding an ATV, catching up with a stray cow to return it to a pen. The ATV tire struck a hole or other obstacle, causing the employee to be ejected and fall to the ground. His leg was broken and he was hospitalized.

An employee was driving a van in reverse when they fell out of the vehicle and landed on the ground in the parking lot. The employee sustained a fractured left hip.

An employee was rolling a pipe in a cutting rack and his right little finger became caught between sections of the pipe. The employee's finger was surgically amputated.

An employee was working a vertical bandsaw, cutting half-inch diameter rods into pieces. While using a steel chisel to move the cut pieces, the blade caught his leather glove and pulled his index finger in. The employee sustained an amputation of the finger between the first and second knuckle.

An employee was operating a lathe in a machine shop. The rotating head of the lathe caught the employee's left glove, resulting in a compound open fracture to the left wrist and a laceration to left ear.

An employee was descending the stairs of an oil/gas rig. As he approached the fifth step from the bottom, he slipped. His left ankle was caught in the steps, and he suffered fractures to the left fibula, tibia, and talus. He was hospitalized, requiring surgery.

The injured employee was loading a piece of pipe into a pipe bending machine. He had his right hand on the front of the loader while his left hand supported the piece of pipe in the back. A second operator had slightly clamped around the pipe to keep it in place. The third operator called out a measurement. The machine actuated and caught the the injured employee's left middle and ring fingers between the wiper and the material. The employee required surgery and sustained amputations to the distal joint of the middle and ring fingers.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.