Jernberg Industries, LLC.

On January 24, 2025, an employee was inspecting a meter when an arc flash occurred and burned the employee's hands.

An employee was trying to line up the back and front rollers of a jammed conveyor when his left ring finger was partially amputated between the sprocket and drive chain.

An employee was assisting with pipe on a drilling rig. The slips came down and landed on the employee's left foot fracturing four metatarsals.

Two employees were struck by the rotary table of a drilling rig while installing caisson. Employee 1 suffered multiple fractures, internal injuries, and head trauma. Employee 2 suffered multiple fractures, internal injuries, spinal injury, and head trauma.

Employees were felling hazard trees. The injured employee was conducting 'bucking' operations to saw a tree from the road when the tree kicked-back, pinning him against the ground and fracturing his left femur. The employee was hospitalized and required surgery.

An employee was greasing tongs on a work-over rig. The tongs lacerated one of the employee's fingers.

An employee was chaining a vehicle when he had to change tools and the compressor. As the compressor was being charged, the employee stepped near the vehicle to make sure the compressor was attached. Then, he instructed a co-worker to lower the compressor. His right hand was on the compressor and under the chain, causing his ring finger to be crushed.

An employee was using a foot-pedal-operated shear press. While the employee was adjusting material in the press, it activated and crushed their left ring fingertip, resulting in an amputation.

An employee was tightening a bolt on a brass plate located on top of a die when the ram block underneath the press contacted their right index finger, resulting in a partial amputation. The ram block was not locked out at the time of the incident.

An employee was cutting a 3-inch round stock on a miter saw and amputated his fingertip.

An employee was loading a steel bar into a thread-rolling machine. The employee attempted to reposition the bar when it started spinning and caught his left glove. The employee's thumb was pulled into the feed table roller, resulting in fractures to the left thumb, wrist, and forearm.

A commercial jet aircraft crashed into the northwest corner of the facility and a fire resulted. An employee inside the facility sustained burns to his head, neck, and back.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.