KoneCranes, Inc.

An employee was on a step ladder to measure and mark a crane rail for modification. The employee fell approximately 12 to 15 feet to the ground, resulting in a fractured right hip.

An employee was performing maintenance on a hoist that was on a mill roof when the employee fell approximately 14 feet through a roof opening to the floor below, suffering a broken right elbow, broken right pelvis, and head trauma.

An employee was preparing to remove a hook/bottom block from an under-the-hook lifting device when the crane hook latch partially amputated the employee's right thumb.

On or about August 3, 2015, an employee was struck by a man lift while walking down an aisle.

Two employees were attempting to lubricate pinion gears on an overhead crane bridge drive. To prevent overspray, the first employee held a blue shop rag behind the pinion gear being lubricated. The second employee sprayed the lubricant. The first employee asked the second to move the bridge forward using the crane pendent control, so he could lubricate the entire gear. The second employee inched the crane forward, at which time the blue shop rag and the first employee's finger got pinched between the pinion gear and the drive wheel.

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

Employees were building a gantry. The injured employee was carrying part of the gantry when their left ring finger was crushed between the gantry and wood. The employee's fingertip was amputated.

A crane operator slipped and fell while getting out of his crane, landing on the ground and rendering him unconscious. The employee was hospitalized.

A civilian vehicle entered the construction site to avoid a motor vehicle accident and struck two employees who were cleaning up the area. The two employees sustained injuries and were hospitalized.

An employee was assisting the drill rig operator when his left little finger was crushed by the Kelly bar, resulting in amputation of the finger.

An employee was removing a blade that was lodged in a pipe when their foot was caught by the cold cutter blade attachment. The employee sustained a crush/laceration injury to three toes on the right foot. The employee was hospitalized.

An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.

An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.