105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Defiance Metal Products

Exposure to environmental heat · Effects of heat and light, unspecified

Federal OSHA recorded a severe workplace injury at Defiance Metal Products, 944 By Pass Rd, HEBER SPRINGS, ARKANSAS 72543 on — Effects of heat and light, unspecified, affecting the bODY SYSTEMS.

An employee was operating a handheld spot welder when he started to feel ill and experienced cramps and nausea. He was hospitalized for heat stress.

Hospitalized BODY SYSTEMS Heat-environmental

Defiance Metal Products

On December 5, 2023, an employee was setting up a brake press machine when a piece of the bottom die burst and struck the employee. They sustained a laceration to the lower right side of the abdomen.

Defiance Metal Products

An employee was operating a brake press in safe mode while changing a die on the press. The press cycled, breaking the employee's left arm.

DEFIANCE METAL PRODUCTS

An employee was operating a brake press to form small metal parts and pinched his left middle finger between the material and the front of the ram amputating the middle fingertip.

View Defiance Metal Products's full OSHA safety record →

Great Northwest Concrete

An employee was performing finishing work on a residential driveway when they began to experience body cramps and were hospitalized for heat stress and dehydration.

Lady Moon Farms, Inc.

An employee was staking tomato plants on a farm. The employee began to feel sick and collapsed, suffering from dehydration and heat shock.

Federal Bureau of Investigation

An agent was participating in SWAT team selection and was performing various physical fitness skills including running and exercise intervals. The agent experienced dehydration and a muscular injury that required hospitalization.

Hi-Tech Roofing & Sheetmetal, Inc.

An employee was traveling back from work when they became ill and experienced dizziness due to heat exhaustion.

2911 Logistics

On September 26, 2023, an employee was delivering packages when he began to feel ill with a pain in his side. He was hospitalized for heat exhaustion and dehydration.

Associated Metal Forming Technologies

An employee was verifying light curtain function at a load cell tester when their right index finger was amputated by a hydraulic cylinder above the middle knuckle.

Progressive Stamping, Inc.

An employee was positioning an overhead crane to stand up a skidded coil when the coil swung back. The employee was caught between the swinging coil and another coil sitting on a coil pad, resulting in hospitalization due to a loss of consciousness and a pelvic injury.

Gestamp

An employee was performing general cleanup duties when they collapsed and passed out due to heat exhaustion. They were hospitalized for heat exhaustion, dehydration, and acute renal failure.

Jefferson Industries

A temporary employee was helping a forklift operator by holding metal sheets to steady them as they were placed on a rail for feeding to a stamp machine. The operator lowered the forks with the blanks (weighting approximately 750 pounds). The temporary employee's right index finger was caught between the metal and the feeding rail. The finger was crushed and partially amputated through the bone.

Utica Metal Products, INC.

An employee was using a mechanical trim press to trim flash off metal parts. The employee was loading a part to be trimmed when the press cycled and crushed the index fingers on both of their hands. The employee sustained a fingertip amputation. The machine was not guarded at the time.

NATIONAL MILL MAINTENANCE, LLC

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

The Goodyear Tire & Rubber Company

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

Big River Steel, LLC

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

American Tile & Marble Co., Inc

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

Johnson Industrial Coatings, LLC.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.