Fall or jump from and struck by same vehicle in normal operation, nonroadway · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at CATERPILLAR INC., 100 CATERPILLAR DR., BOONEVILLE, MISSISSIPPI 38829
on — Fractures, affecting the multiple lower extremities locations, unspecified.
Final narrative
On August 15, 2018, an employee was operating a stand-up forklift and turning a corner when the vehicle hit a wet spot and started to slide. The employee released the dead man switch to stop the forklift and then dismounted the vehicle during the slide. His left foot/ankle was struck by the vehicle and a plastic pole protector as the vehicle continued to travel in the direction he exited. He suffered multiple fractures and a puncture wound.
HospitalizedMultiple lower extremities locations, unspecifiedForklift, order picker, platform truck-powered
On September 13, 2025, an employee had been working at an outdoor event. At the end the day, she was walking around outside the facility to make sure everything was put away and felt overheated. The employee was hospitalized for heat-related illness.
On September 5, 2025, at approximately 7:35 AM, a temporary employee was at the engine block rollover machine. Their left index fingertip was caught and amputated between a pneumatic part and a guard.
On June 27, 2025, at approximately 8:35 AM, an employee was operating a box maker machine when their left middle fingertip was caught by a chain and sprocket. The employee's fingertip was partially amputated without loss of bone or the fingernail.
An employee had just put a dock plate in place. While stepping back over the plate, the employee tripped and fell onto it. The employee suffered a broken hip.
An employee was driving a double pallet jack down an aisle when another piece of equipment came through the aisle. Realizing that the two pieces of equipment were about to collide, the employee jumped off the pallet jack. It then ran over his leg, breaking his leg/ankle.
An employee was operating a forklift when the load shifted. The employee jumped from the forklift and it rolled backward, falling off the ramp and pinning the employee underneath it. They sustained head trauma and injuries to the shoulder, arm, pelvis, and leg.
An employee was operating a rider-style powered pallet jack. He lost his balance causing him to fall off and become trapped between it and a wall. He suffered a broken pelvis and was hospitalized.
An employee was operating a stand-on mower down a hill when the mower started sliding. The employee jumped off the mower and fell to the ground. Their hand was cut by the mower blade, resulting in a laceration and a thumb amputation.
An employee was driving a package car around a building on UPS property when the vehicle struck a bump. The force from hitting the bump unbuckled the employee's seatbelt and caused them to fall out of the vehicle onto the asphalt. The employee was hospitalized and required surgery for fractures to their hip and pelvis.
More severe injuries in this industry (NAICS 333618)
An employee was moving a hoist to the end of a bridge rail to create space for another hoist on the same rail. The hoist being moved, along with its supporting beam, detached from the bridge rail and fell, striking the employee in the head. He suffered a contusion and laceration to the head and was hospitalized.
An employee was operating a machine. When they performed a motion to push a machined engine block away from their body, they experienced a back strain, resulting in hospitalization.
On September 13, 2025, an employee had been working at an outdoor event. At the end the day, she was walking around outside the facility to make sure everything was put away and felt overheated. The employee was hospitalized for heat-related illness.
An employee was installing insulation in a wall panel when the panel fell on top of them, resulting in leg and back injuries that required hospitalization.
An employee put a cylinder machining pallet into manual mode to unjam it. After completing the task, their left hand became lodged between a pulley and belt, resulting in the amputation of three fingers.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.