Quality Uptime Services

An employee was sitting in the cab of the truck while waste oxidizer was being offloaded. The waste reacted with the receiving tank and an explosion occurred in the tank. Fire traveled through the hose to the tanker truck, causing it to explode. The employee jumped from the burning truck and was hospitalized with burns to his face, chest, and arms.

An employee was installing piping and valves for fire protection systems in the vicinity of an electrical meter outside of a new warehouse. The meter exploded, causing burns to the employee's face and arms.

An employee was pouring molten aluminum into a drain pot. The aluminum touched moisture at the bottom of the drain pot and an explosion occurred. The employee sustained burns to their face, hands, and legs.

An employee was operating an oxygen-deficient oven that required manual ignition to make charcoal from wood. As the oven was opened, oxygen was introduced to the environment, resulting in an explosion. The employee sustained head trauma as well as fractures to the arms and legs.

An employee was setting up the electrical parts for a fireworks display. They were inserting an e-match when it generated friction with something else. A 3-inch firework shell ignited, injuring the employee's hand and head.

An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.