Eagle US 2 LLC

On the morning of February 20, 2017, at approximately 7:37 AM, an employee was using an emery cloth to polish a small copper electrode part on a lathe. His glove or the cloth became caught in the lathe's rotating chuck, which then avulsed his left ear and face, caused an abrasion on his left hand, and broke his left clavicle.

An employee was passing through a building when she suffered an allergic reaction to a cinnamon air freshener. The employee began to feel dizzy and ill, ultimately becoming unresponsive. The employee was hospitalized.

An employee wearing a blasting hood was preparing to blast inside a tank. The line that supplies the hood with breathing air was plugged into an argon line. The employee breathed the argon gas and fell. The employee was hospitalized for argon poisoning.

An employee was preparing a pump for maintenance. When the employee removed a cover, chemicals were released into the air. The employee was exposed to hydrogen sulfide and methyl mercaptan and was hospitalized.

An employee was exposed to carbon monoxide that was leaking from a kiln. The employee lost consciousness and was hospitalized.

An employee was inside a trailer with a running lawn mower and sustained carbon monoxide poisoning.

An employee was unloading freight from a truck when a stack of doors fell over and knocked the employee to the ground. The employee sustained a fractured femur.

An employee was performing rebar fabrication using a bending machine. The employee's glove became caught in the area where the rebar bend overlaps onto itself. The subsequent bending/cutting caused the two overlapping portions to squeeze together and amputate approximately 1/4" of his left index fingertip.

An employee was building wood detail blocking and a wood member needed to be resized. The employee took the wood member to the table saw and set the fence to the correct size. The employee pressed down on the board to control it when his left little finger contacted the running blade, resulting in an amputation.

An employee was clearing a pipe along a culvert using a motorized plumbing machine. The end of the machine got tangled and stuck in long grass and other debris. The employee went to lift the end of the machine out of the grass and clear the blockage when his hand was pulled into the machine, resulting in a partial amputation and open fracture of his left distal phalanx.

An employee was operating a router when it cut his right little finger, causing an amputation through the bone.

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.

A security employee was holstering her firearm when the gun discharged a bullet into her right leg. The employee was hospitalized.

A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.

An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.