Thrown, fell, or jumped from animal being ridden · Intracranial injuries, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Kapstone Paper and Packaging Corporation, Bair Ranch 66418 Highway 6 , GLENWOOD SPRINGS, COLORADO 81601
on — Intracranial injuries, unspecified, affecting the brain.
Final narrative
An employee fell from a horse while participating in teambuilding horseback riding. The employee's head struck the ground and the employee lost consciousness, requiring hospitalization.
An employee was trying to rope the rear legs of a cow. The cow changed direction and the rope whipped, causing the employee to fall from his horse. He landed on the ground on his back and broke several ribs.
An employee was riding a horse on a trail to provide information and directions to park visitors. As the employee and horse were transitioning down a slope and to the left, the employee fell off the horse onto the trail. The employee sustained swelling and bruising to the spine, a neck injury, and lacerations and contusions.
An employee was riding a horse to check for sick cattle when the horse became spooked and bucked the employee off. The employee was knocked unconscious and suffered a brain bleed, fractured ribs, fractured vertebrae, and a tear in his left shoulder.
Tools and parts were being lowered to the ground from an elevated platform in a 5-gallon bucket. The rope being used to lower the bucket failed; the tools and parts fell and lacerated the left forearm and upper left leg of an employee on the ground.
An employee was tracking an infeed belt on a scrap hogger when their right arm was caught between the belt and a roller. The arm was broken and the employee's shoulder was dislocated. The employee was hospitalized.
An employee was working to clear a jam from a paper napkin folder. The ram that advanced the napkins pushed the employee's right arm into the side of the machine, causing several lacerations and a hairline fracture.
An employee was troubleshooting overflowing ink on a printer-slotter machine when their right ring fingertip was caught in a guarded roller, resulting in a partial amputation.
An employee was disconnecting wires in preparation to swap out a refiner motor when they contacted energized equipment and sustained an electrical shock. The employee was hospitalized.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.