BRIGGS & STRATTON CORPORATION

An employee was working on a belt-driven coolant pump when his left hand was caught in the belt, resulting in lacerations and fractures. He was hospitalized and required surgery.

An employee was changing a water hose on a die machine. The employee had extended the ram of the machine fully to gain access to the water line. As the employee was checking the water hose, the hydraulics on the ram released, causing the ram to retract to its holding position. The ram caught the employee's hands, pinned them, and broke bones in both hands.

An employee was on a fiberglass step ladder, about 3 feet off the ground, capping off a dead air line. The employee fell off the ladder and suffered two broken ribs, a punctured lung, and head trauma.

An employee was asked to help perform maintenance on a die cast machine. The employee entered the work area, got into a kneeling position, and began using an open-end wrench to remove a hydraulic hose so a fitting could be repaired. When the hose came free from the fixture, residual hydraulic pressure released and hydraulic fluid struck the employee in the chest. The employee fell backward and struck his head on surrounding machinery. The employee was hospitalized with a subdural hematoma, fractures to the forehead, orbital area, and ribs, and required stitches for a forehead laceration.

A trim die was being transported by a forklift. When the die was placed on the ground, the top part of it popped off and crushed an employee's hand against a set of metal stairs. The employee suffered a laceration to the right hand between the thumb and the index finger.

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

An employee was moving a hoist to the end of a bridge rail to create space for another hoist on the same rail. The hoist being moved, along with its supporting beam, detached from the bridge rail and fell, striking the employee in the head. He suffered a contusion and laceration to the head and was hospitalized.

An employee was operating a machine. When they performed a motion to push a machined engine block away from their body, they experienced a back strain, resulting in hospitalization.

On September 13, 2025, an employee had been working at an outdoor event. At the end the day, she was walking around outside the facility to make sure everything was put away and felt overheated. The employee was hospitalized for heat-related illness.

An employee was installing insulation in a wall panel when the panel fell on top of them, resulting in leg and back injuries that required hospitalization.

An employee put a cylinder machining pallet into manual mode to unjam it. After completing the task, their left hand became lodged between a pulley and belt, resulting in the amputation of three fingers.

An employee was readjusting a safety hook to remove hardware from gang forms when his feet slipped. He fell to the ground, resulting in a broken left arm and wrist.

An employee was on a step ladder in a store aisle, making room on shelving for merchandise. She fell from the step ladder to the floor, suffering two fractures in her left leg. She was hospitalized, requiring surgery.

An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.

An employee lost his footing while climbing an inclined ladder. He stumbled down one step and was able to stabilize himself by holding the railing and twisting his body, but he suffered an internal abdominal injury and was hospitalized.

An employee was manipulating dies on a brake press. The press caught and crushed the employee's right forearm, resulting in hospitalization.