Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Metal Container Corporation, 1201 Metal Container Court, WINDSOR, COLORADO 80550
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was performing preventative maintenance on a motor assembly with a belt/pulley. He was inspecting the belt for tears when his right pinky finger was caught in a pinch point between the belt and wheel, resulting in a partial amputation of the right pinky finger.
An employee was checking a conveyor belt chain when his right index finger came into contact with the moving chain. He suffered a partial amputation to the right index finger.
An employee was using a rag to clean a liner while rotating the liner turret counter-clockwise with his left hand. The employee's right little finger was caught between the stationary dog leg channel and the rotating star wheel. The fingertip was amputated above the first knuckle.
On November 01, 2019, an employee was cleaning a mandrel (metal cylinder which holds the can) of a can printing decorating machine when the printer jogged, causing his right hand to be caught between machine's mandrel and blanket wheel (transfers the image onto the can). The employee suffered a laceration and fracture to his right hand, requiring hospitalization.
An employee was stepping up onto a platform. The employee's foot caught on a step and their right shin contacted the step as they fell, causing a broken tibia and fibula.
The employee had been driving a fork truck to load empty cans (product). The injured employee then left the fork truck as another employee was reversing a fork truck nearby. He was in the other fork truck driver's blind spot, and the fork truck driver pinned him between the two fork trucks. He fractured his lower left and right legs, requiring hospitalization.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 332431)
An employee was clearing a jam on a ring press. The press's secondary switch was activated, engaging it. It caught the employee's hand. The employee was hospitalized and sustained the amputation of two fingers. The machine was unguarded at the time of the incident.
An employee was checking a conveyor belt chain when his right index finger came into contact with the moving chain. He suffered a partial amputation to the right index finger.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.