Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Ferrara Fire Apparatus, 27855 james Chapel North rd., HOLDEN, LOUISIANA 70744
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was cutting a piece of angle iron with a horizontal fixed-stand band saw when the employee's left index finger entered the point of operation. The blade then amputated the employee's left index fingertip just below the cuticle.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was walking on the top deck of a fire truck that was being assembled. The employee lost their balance and stepped on open, horizontally hinged doors, which could not support their weight. The employee fell 6 feet to the concrete floor and suffered fractures to their elbow and pelvis.
An employee was assessing an overhead stamping press door for alignment issues when the counterbalance moved and their left thumb was caught between the chain and the sprocket. The thumb was amputated. The door was locked out/tagged out at the time but gravitational pull was not controlled.
An employee was performing a bubble test (pressure test) on a pipeline to locate a leak when the joint elbow that was producing the leak detached and struck him. The employee sustained fractures to a rib and clavicle, as well as injuries to his spleen and lung.
An employee was installing a combat vehicle turbine engine to a dynamometer stand in a dynamometer test engine cell. While lining up the turbine engine to the stand, the employee's left arm was fractured between the engine and the face of the stand.
An employee was operating a forklift to retrieve a stack of empty containers from behind a weld cell. The forklift grabbed the stack. Then the forks tilted back, causing the top container to fall onto the forklift cage. The employee got off the forklift and went to pull the container down. The container fell on the employee's head and leg, resulting in a bump to the head and a fractured right leg.
A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.
A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.