HOUSTON, TEXAS—
TEXAS STEEL CONVERSION
Caught in running equipment or machinery, n.e.c. · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury at TEXAS STEEL CONVERSION, 3101 HOLMES RD., HOUSTON, TEXAS 77051 on — Crushing injuries, affecting the hand(s), n.e.c..
Final narrative
An employee was visually inspecting the liner plates. While conducting the inspection, the employee's gloved right hand was caught in the machine roller resulting in a crushing injury to the hand. The machine was not guarded at the time of the incident.
More severe injuries at TEXAS STEEL CONVERSION
HOUSTON, TEXAS—
TEXAS STEEL CONVERSION
An employee was color coding the ends of pipes with spray paint. A pipe got stuck on the flapper that moves the pipes up to the table. The employee went to clear the pipe and another pipe fell back on his right arm, causing a laceration that required hospitalization.
HOUSTON, TEXAS—
TEXAS STEEL CONVERSION
An employee was trying to unjam 1,700-pound steel pipes. A pipe rolled back and crushed his fingers against another pipe. His left little finger was amputated and the ring finger was injured, requiring stitches.
HOUSTON, TEXAS—
TEXAS STEEL CONVERSION
An employee was feeding a 25-foot pipe into an inbound punch straightener. The employee was positioning the pipe with a cheater bar with his right hand on the cheater bar and his left hand on the railing of the punch straightener. The pipe contacted the employee's left thumb on the railing, resulting in a partial amputation.
HOUSTON, TEXAS—
TEXAS STEEL CONVERSION
An employee was threading a pipe on a CNC lathe. The machine activated while he was holding a piece of sand paper between the chuck and the pipe. His right middle finger was amputated.
View TEXAS STEEL CONVERSION's full OSHA safety record →
Similar incidents · Same event type
MIDLAND, TEXAS—
Scout Surface Solutions
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
CHESTER, ILLINOIS—
Gilster-Mary Lee Corporation
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
DALLAS, TEXAS—
Maxwell Paper Products Co
An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.
CONESTOGA, PENNSYLVANIA—
Turkey Hill LLC
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
ERIE, PENNSYLVANIA—
Erie Strayer Company
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 332811)
SAINT LOUIS, MISSOURI—
PAULO PRODUCTS COMPANY
On October 7, 2025, an employee was pulling a customer load out of post-wash equipment when his left index finger was pinched between the sled and the roller on the charge cart conveyor, resulting in a fingertip amputation between the nail and first joint.
MELROSE PARK, ILLINOIS—
Bluewater Thermal Solutions dba Hi Temp LLC
An employee was welding a bearing on a piece of equipment. He was lying on the belt while performing this task. The welding rod contacted the employee or the belt and the employee was shocked by electricity. The employee was hospitalized.
HASTINGS, NEBRASKA—
Lawrence Industries Inc
An employee was lighting a pilot light that burns off residual oxygen in the purge chamber of a heat-treating furnace. Residual gas and built-up oxygen in the purge chamber caused an explosion, which blew the front of the furnace's door off its track and the hood/exhaust system off its rivets. The employee was knocked down and suffered burns and lacerations to the left side of his face.
WILLOUGHBY, OHIO—
Paulo Cleveland Division
A temporary employee was moving a load using a walk-behind powered industrial vehicle (PIV). He backed into a safety bollard and his leg was pinned between the PIV and the bollard, resulting in a crush injury and laceration to the lower leg. The employee was hospitalized for surgery.
MAPLE SHADE, NEW JERSEY—
Thomson Lamination Co. Inc.
An employee was setting up a work piece on the honing machine when his left hand fingers were crushed in a pinch point. The employee sustained an amputation of the distal joint of his ring finger.
More severe injuries in TEXAS
EAST BERNARD, TEXAS—
T G Meat Center LLC
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
LUBBOCK, TEXAS—
Professional Flooring Supply
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
HOOKS, TEXAS—
EnviroSafe Demil LLC
An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.
LOLITA, TEXAS—
Inteplast Group
An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.
HALLETTSVILLE, TEXAS—
Regency IHS of Fairwinds Halletsville, LLC
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.