Aluminum Shapes, LLC

An employee was cutting logs with a billet saw. The saw blade broke, causing amputations to the employee's left little, ring, and middle fingers. The employee was hospitalized.

Employees were lifting a metal plate with a chain and hoist. The steel plate was to be modified/outfitted with eyehooks. Once the eye hooks were welded onto the plate, the plate was lowered. As the plate was being lowered one of the welds failed causing the plate to fall and land on the employee's foot resulting in an amputation.

An employee was operating a punching press to punch out aluminum parts when the press repeated and struck the employee's left index finger, lacerating it and requiring hospitalization.

An employee was hospitalized after receiving chemical burns.

An employee was hospitalized after being struck by the stretcher.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee's left arm was caught in the fingers or jaws of the head stretcher machine, resulting in a laceration. The employee was hospitalized.

An employee was performing regular duties in the cast house and sustained heat exhaustion.

At 7:01 p.m. on June 16, 2025, two employees were pushing a saw horse with a bundle of aluminum on it when it flipped over onto the injured employee. The employee was hospitalized with a broken leg and required surgery.

On June 4, 2025, at approximately 1:00 AM, an employee was working when they experienced cramping and were hospitalized with a heat illness.

An employee was performing maintenance on a press puller and aligning the puller when it fell. The puller electrical panel struck their left upper back, resulting in fractures to their T12 and L1 vertebrae. The employee was hospitalized.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.