Aluminum Shapes, LLC.

Employees were lifting a metal plate with a chain and hoist. The steel plate was to be modified/outfitted with eyehooks. Once the eye hooks were welded onto the plate, the plate was lowered. As the plate was being lowered one of the welds failed causing the plate to fall and land on the employee's foot resulting in an amputation.

An employee was clearing jammed scrapped aluminum on a moving conveyor and suffered a fingertip amputation.

An employee was operating a punching press to punch out aluminum parts when the press repeated and struck the employee's left index finger, lacerating it and requiring hospitalization.

An employee was hospitalized after receiving chemical burns.

An employee was hospitalized after being struck by the stretcher.

An employee was operating a band saw when his right little fingertip was amputated.

An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.

An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.

An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.

An employee was using a shaper to cut wood when their right hand contacted the blade, resulting in a partial amputation to the right ring finger.

An employee's left arm was caught in the fingers or jaws of the head stretcher machine, resulting in a laceration. The employee was hospitalized.

An employee was performing regular duties in the cast house and sustained heat exhaustion.

At 7:01 p.m. on June 16, 2025, two employees were pushing a saw horse with a bundle of aluminum on it when it flipped over onto the injured employee. The employee was hospitalized with a broken leg and required surgery.

On June 4, 2025, at approximately 1:00 AM, an employee was working when they experienced cramping and were hospitalized with a heat illness.

An employee was performing maintenance on a press puller and aligning the puller when it fell. The puller electrical panel struck their left upper back, resulting in fractures to their T12 and L1 vertebrae. The employee was hospitalized.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.