Struck by falling object or equipment, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Specialty Tires of America, Inc., 1600 Washington Street, INDIANA, PENNSYLVANIA 15701
on — Fractures, affecting the multiple trunk locations.
Final narrative
An employee was replacing a fixed wheel on a tire rack when the tire rack, which was approximately 8 feet high, tipped over onto the employee as he removed one of the fixed wheels. The impact broke his back and ribs.
HospitalizedMultiple trunk locationsRacks-garment and other
More severe injuries at Specialty Tires of America, Inc.
On March 11, 2025, an employee was preparing to change the stock roll in the first ply let-off of a tire-building machine. When the employee lifted the stock, the rubber proved to be stuck to the liner; the employee's left arm was pulled around the liner guide roller, and the employee suffered a compound fracture to the forearm. They were hospitalized.
An employee was working inside a live 440-volt electrical panel. He was resetting a timer when he made contact with a live electrical component and sustained burns.
An employee was adjusting the stacking height of a curing bladder assembly in the open mold of a curing press. When the bolts on the closing clamp were loosened, the 60-pound assembly dropped and caught the employee's finger against the cylinder head. The employee's left middle fingertip was amputated.
An employee was using a clam-shaped curing press to vulcanize tires. The employee had to hold a tire in the press as a bladder inflated. The employee's right hand got stuck between the tire and the bladder; the curing press cycled while the employee's hand was stuck, causing open fractures to the middle and ring fingers.
An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.
An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.
The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.
Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.
An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.
More severe injuries in this industry (NAICS 326211)
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was adjusting a pallet on a conveyor when it came off the conveyor and struck his right ankle, breaking the tibia and fibula. The employee was hospitalized.
At 2:45 p.m., an employee was outside the plant during a break before his next shift. He was speaking with an associate when he suddenly fell from the third-level steps to the ground, striking his head on the concrete. The employee was hospitalized due to internal brain bleeding, a wound to the back of his head requiring staples, and heat-related dehydration.
Two employees were replacing a motor on an overhead conveyor. The old motor fell to the floor, causing a piece of the concrete floor to fly up and strike the injured employee in the face, around the eye. The injured employee sustained a right orbital fracture, a zygomatic arch fracture, and a sphenoid fracture. The employee was hospitalized and required surgery.
An employee was changing the bladder on a hydraulic press. As he lowered the bladder, his left foot was pinned between its bottom ring and the bottom mold of the press. The second toe on the foot was amputated.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.