Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Dart Container Corporation, 2260 Delray Road, THOMASTON, GEORGIA 30286
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was using an improvised bailing wire tool to retrieve a piece of scrap metal from the extruder. The tool got entangled in a moving part and was snatched from the employee's hand. The employee's right index fingertip was amputated.
AmputationFingertip(s)Extruding machinery
More severe injuries at Dart Container Corporation
On May 14, 2025, an employee was manually adjusting a plastic sheet entering the thermoforming oven when their right hand was pulled into the pin chain and idler wheel. The employee sustained the amputation of their middle finger.
On August 8, 2024, at approximately 7:25 AM, an employee was performing startup activities when their left hand was caught between two rollers on a chrome roller unit. The employee's left little, middle, and ring fingers were crushed, and they sustained two fingertip amputations to the little and ring fingers.
An employee was re-assembling an air cylinder and aligning an end cap to fit properly with the cylinder barrel. When the end cap aligned and snapped into place, the employee's fingers were caught in the nip point where the end cap connects with the cylinder barrel. The employee sustained amputations to their left middle and ring fingertips.
An employee was bending over to pick up a marker from the floor. A whiteboard fell from its base and struck the back of the employee's head, causing a head injury.
An employee was working on a case erector line. A box got stuck coming out of the taper. The employee removed the box, placed it on the conveyor, and then grabbed the tape to clear the jam. The tape pulled his right hand back into the machine, past the guard, and between the two sprockets. His index finger was crushed.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326140)
An employee was performing a maintenance task on a shape mold machine. The equipment had a clog preventing it from pumping material into the next stage. The employee's left hand was inside the hopper's butterfly valve when it unexpectedly turned. The employee's index and middle fingertips were partially amputated.
An employee was stacking used cardboard onto a pallet in the shipping and receiving area when he tripped over the scale by the loading dock door. The employee fell to the concrete floor and was hospitalized with a fractured left hip that required surgery.
On May 14, 2025, an employee was manually adjusting a plastic sheet entering the thermoforming oven when their right hand was pulled into the pin chain and idler wheel. The employee sustained the amputation of their middle finger.
At 6:30 p.m. on April 23, 2025, an employee was using a CNC panel saw when his fingers were pinned in by the pressure beam used to hold the board he was cutting. The sawblade, coming from beneath, amputated about 1/4 inch of his right little fingertip.
An employee was diagnosing an issue with a bagger that had jammed. The employee was cleaning out a piece of supporting equipment (a scrap barrel) when the blower motor contacted his right middle fingertip and fingernail, resulting in an amputation. The blower motor was not guarded at the time.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.