Dart Container Corporation

On May 14, 2025, an employee was manually adjusting a plastic sheet entering the thermoforming oven when their right hand was pulled into the pin chain and idler wheel. The employee sustained the amputation of their middle finger.

On August 8, 2024, at approximately 7:25 AM, an employee was performing startup activities when their left hand was caught between two rollers on a chrome roller unit. The employee's left little, middle, and ring fingers were crushed, and they sustained two fingertip amputations to the little and ring fingers.

An employee was bending over to pick up a marker from the floor. A whiteboard fell from its base and struck the back of the employee's head, causing a head injury.

An employee was working on a case erector line. A box got stuck coming out of the taper. The employee removed the box, placed it on the conveyor, and then grabbed the tape to clear the jam. The tape pulled his right hand back into the machine, past the guard, and between the two sprockets. His index finger was crushed.

In the thermal forming department, a machine was shut down because the sheet was wrapped around the rolls. The sheet was cleared, and the leader sheet was in place to start the line. During the start-up process, the sheet broke away from the leader sheet. An employee was on the east side of the chrome-roll stand between the scanner and draw rolls. The employee was trying to save the sheet and manually hand feeding the sheet into the draw rolls when his hand was caught between the rolls and his arm was pulled in. He suffered injuries to his fingers, hand, and arm up to the bicep and internal bleeding.

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee had just spliced a new roll to the paper being fed into a winder machine. The employee realized the splice would not hold and was working to correct it when their right hand was caught between the winder head and a belt. The employee suffered broken fingers. The incident took place during a training activity.

An employee was removing a step cam by with a sledgehammer when a piece of the cam broke off, fell, and struck his right forearm.

An employee was repairing the locking mechanism on a machine when their right index finger was partially amputated.

An employee was clearing a jam on the cup production line when a blade caused a laceration and a partial amputation to their left middle finger.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.