Federal OSHA recorded a severe workplace injury
at Buck Company, LLC, 897 Lancaster Pike, QUARRYVILLE, PENNSYLVANIA 17566
on — Fractures, affecting the nonclassifiable.
Final narrative
An employee was cutting a used 55-gallon drum when it exploded. The employee sustained contusions and broken bones.
An employee was unlatching a hopper on forklift to dump its contents when their left index finger was caught in the hopper, resulting in amputation of the fingertip.
An employee was hooking up a bowl ladle. Their hands were on the clip of the crane hook and the clip caught their left middle finger, resulting in a fingertip amputation.
An employee was working on a sand conveyor, using the jog switch with a key interlock to run the belt up and down identifying bad bearings, as well as installing a cover. Power to the conveyor was turned on and it amputated the employee's left middle finger.
An employee was cleaning leaking plastic from an injection nozzle. As the employee was lifting and dislodging plastic, the nozzle shifted and burst apart. The nozzle struck the employee's mouth and jaw and burned the employee. They also sustained a jaw fracture.
An employee was fueling a tractor with diesel when there was an explosion and a fire started. The employee sustained third-degree burns to 32% of his body, chest, and arms.
An employee was torching materials to free a jam in a baler machine when an explosion occurred, resulting in second-degree burns to their left arm and leg that required hospitalization.
An employee was welding an oil pipe and installing a gauge on the pipe of a drilling rig. As he cut into it with a torch, an explosion occurred. The shockwave of the explosion caused the employee to sustain a concussion and multiple broken bones.
More severe injuries in this industry (NAICS 331511)
An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.
An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.
An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.
An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.
An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.