Struck against object or equipment, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Enterprise Casting LLC, 40 South Ave, LEWISTON, MAINE 04240
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was cleaning a sand muller when their right hand slipped into the machine and the middle finger contacted the blade resulting in a fingertip amputation.
AmputationFingertip(s)Agitators, mixers-earth, mineral
An employee was tying a feed bag when his hand slipped and struck the side of the feed hopper resulting in a laceration to the left wrist. The employee was hospitalized.
At approximately 9:45 AM, a maintenance technician was assisting in removing a feed roller from a coating tank. The bolts were removed and a supporting chain was in place. The technician was using a prybar to unseat the roller shaft when the prybar slipped, causing him to lunge forward and strike the right side of his face against a valve stem. The technician sustained a fracture and laceration to the cheek, and required surgery for an injury related to his right eye. He was hospitalized.
An employee was cleaning and performing maintenance on a vertical panel saw when the employee impacted the saw blade. They sustained a finger fracture and laceration.
More severe injuries in this industry (NAICS 331511)
An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.
An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.
An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.
An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.
An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.
A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.