Contact with objects and equipment, unspecified · Traumatic injuries and disorders, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Georgia-Pacific Wood Products LLC, 545 County Road 6, BELK, ALABAMA 35545
on — Traumatic injuries and disorders, unspecified, affecting the nonclassifiable.
Final narrative
While preparing to lock out equipment, an employee was caught under a platform as air bled from a cylinder. The employee suffered injuries (as well as difficulty breathing while pressed under the platform) and was hospitalized.
HospitalizedNonclassifiableNonclassifiable
More severe injuries at Georgia-Pacific Wood Products LLC
An employee was cleaning an air station with a pressure washer when the water stream went through their boot and contacted their left foot, resulting in a 1.5 inch by 1 inch laceration to the top of the foot.
An employee was operating a forklift in reverse carrying five bundles of plywood. Upon applying the brakes, the top load shifted backward onto the top of the forklift cage and pinched the employee's the left middle fingertip against the forklift cage, resulting in a partial fingertip amputation.
An employee was testing whether electricity was available at a valve on a piece of equipment that moved from side as it cut logs. After testing, he inserted an electric plug back into the valve. This caused the equipment to move to the side and then return to its home position. The employee was caught between a motor and a hydraulic tank and suffered an injury to the left shoulder and upper torso, resulting in three broken ribs.
On June 17, 2024, at approximately 5:55 a.m., a machine operator injured his right leg after stepping into a 6-inch gap between sections of the edger infeed platform grating. The employee sustained a muscle tear and hematoma.
An employee was helping repair a sawmill trimmer. The employee transferred a pry bar from their right hand to their left hand, then turned, at which point the employee's left middle fingertip was pinched between the pry bar and a saw box. The fingertip was crushed at the nailbed, but not fractured; the employee was hospitalized and required surgery.
Two employees were struck by the rotary table of a drilling rig while installing caisson. Employee 1 suffered multiple fractures, internal injuries, and head trauma. Employee 2 suffered multiple fractures, internal injuries, spinal injury, and head trauma.
Employees were felling hazard trees. The injured employee was conducting 'bucking' operations to saw a tree from the road when the tree kicked-back, pinning him against the ground and fracturing his left femur. The employee was hospitalized and required surgery.
An employee was chaining a vehicle when he had to change tools and the compressor. As the compressor was being charged, the employee stepped near the vehicle to make sure the compressor was attached. Then, he instructed a co-worker to lower the compressor. His right hand was on the compressor and under the chain, causing his ring finger to be crushed.
More severe injuries in this industry (NAICS 321113)
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.