Raven Services Corporation

On August 25, 2017, at approximately 11:00 a.m., an employee was operating a table saw when his hand slipped and his left index fingertip made contact with the rotating blade and was amputated.

An employee was making modifications to an electrical panel when an arc flash occurred. The employee suffered burns to multiple parts of the body.

An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.

An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.

On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.

An employee had just turned off breakers and was loosening wires on panels when they were shocked by 480 volts of electricity.

An employee was doing roof work. The employee fell from the roof to the ground about 12 feet below and suffered multiple fractures.

An employee was making copies at the copy machine. While walking away from the copy machine, her heel snagged on the carpet in the office and she fell. The employee sustained a fractured shoulder.

An employee was operating a vacuum truck, using the controls to raise the bed. As it rose, the bed touched an overhead power line. Electricity passed through the employee, entering through their left hand and exiting through their left toe.

An employee was walking down the hall when she lost balance and fell to the floor, resulting in a fractured keft hip.

An employee was loading equipment into a truck. An object struck the employee, who suffered a gash above the right eye and lost consciousness.

An employee delivered a package. On her way back to her vehicle she was attacked by two dogs that came from around a corner. She was hospitalized with dog bites.

The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.

A technician was operating a crane hoist to lift/remove a cylinder head from the main engine (port). The load was lifted at an angle, causing the cylinder head to get stuck on the cylinder head studs. When it became free from the studs, the cylinder head swung. It struck the technician and caught them against the cabinet door. This resulted in an amputation of their left index fingertip at the distal knuckle.

An employee was securing a power cord to a refrigerated truck container. A truck started backing up to connect with the container and the employee was pinned between the tires of the container and the bolster of the truck, resulting in a fractured leg.

An employee was delivering a package to a house when a dog came through the storm door, jumped on the employee, and bit them in the lower jaw.