An employee was assisting with an operation that was pulling in an underground wire. The employee was guiding a rope through a capstan when their gloved right hand was pulled into the capstan for approximately 1/3 of a rotation. The employee's right index fingertip was crushed and surgically amputated to the first joint.
An employee was climbing a pole during a training exercise. He climbed above a secondary line, reconnected his fall protection device, put his weight on it, and it held. The employee fell when he tried to put his weight to the device again. The employee suffered a broken right heel and a vertebra fracture in his lower back.
Two employees were climbing a utility pole to replace a wire. The pole broke and the employees fell, landing on the ground and suffering leg abrasions and fractures to the face, a left femur, and vertebrae.
An employee was learning to climb a utility pole using a climbing strap and spikes. As he was descending, he lost balance and his weight shifted. His climbing spike became stuck in the pole, causing his knee to buckle. This resulted in a dislocated knee and fractured tibia.
An employee was on an A-frame ladder retrieving materials from a shelf. He slipped and fell and his leg got caught in the ladder rungs, breaking his left tibia.
An employee was unloading materials from a flatbed trailer when they fell from the trailer and landed on the ground. The employee sustained a fractured left leg.
An employee was unloading appliances at a customer location for delivery. The employee was moving a water heater to be placed on the liftgate when he stepped backward and fell to the ground. The employee sustained rib and back injuries.
An employee was performing troubleshooting and maintenance on one of the generators that feed the RF line for glue-laminated timber (glulam) beam production. He was reattaching the outer panel of the generator. A circuit was completed and the employee was electrocuted by the generator and sustained burns. The employee was hospitalized.
An employee was utilizing a utility task vehicle (UTV) to patrol a 138 kV transmission line in a right-of-way. The UTV drove into a washout hole that was approximately 6 feet deep and obstructed by vegetation. The employee sustained a dislocated shoulder, a fractured left humerus, back pain, and a strained ankle. He was hospitalized.
A crew of employees were working to replace a utility pole that was broken by a motor vehicle accident. As the crew was removing equipment from the broken pole, part of the pole broke, fell on the injured employee, and rolled over him. The employee sustained two broken shoulders, multiple broken ribs, and a damaged lung that required hospitalization and surgery.
An Ameren lineman was making secondary voltage connections in a pad-mounted residential feed transformer. The lineman contacted an energized lead bushing, sustained an electrical shock, and was hospitalized.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.