Overexertion in pushing, pulling, or turning-single episode · Multiple sprains, strains, tears
At a glance
Federal OSHA recorded a severe workplace injury
at SARK WIRE CORPORATION, 120 INDUSTRIAL PARK RD., ALBANY, NEW YORK 12206
on — Multiple sprains, strains, tears, affecting the neck, except internal location of diseases or disorders.
Final narrative
At 1:37 p.m. on February 19, 2019, a temporary employee was taking an empty 280-pound steel wire reel off a machine when he suddenly felt pain in his neck and back and fell to the floor. He was hospitalized, having suffered sprains/strains of ligaments of the cervical spine and a contusion of the left shoulder.
HospitalizedNeck, except internal location of diseases or disordersReels, rolls, spools, coils, cones
On June 27, 2023, an employee was getting off a forklift when another forklift ran over his right foot, resulting in compound fractures to his right foot and ankle.
An employee was pushing tables together to seat a party of 20 when he felt a sharp pain and experienced difficulty breathing. The employee was hospitalized for a collapsed lung.
An employee was loading an empty reel on the west reel take-up when they noticed that the wire lying on the east reel take-up had over-accumulated on one side of the reel, making it uneven. The employee stopped the east take-up machine and released tension on the wire to correct the lay. As the employee engaged a mechanical rotation function to take up the wire slack, their right little finger was crushed between two separate wire strands on the reel under tension, resulting in a fingertip amputation. The machine was guarded at the time of the incident.
An employee was operating an overhead crane to transport a bundle of copper tubing. He went to lower the load as he was approaching a rack, but the suspended bundle of tubing suddenly jerked in the other direction. The bundle struck a nearby tool cabinet, and the cabinet tipped over. The employee went to prevent it from falling. However, the cabinet still fell over, striking his right arm and briefly pinning it against another object. The employee suffered a fractured right forearm that required hospitalization.
An employee was working to manually clear copper tubes from the turnover rack due to a faulty sensor. As he used his right hand to remove a finished tube from the turnover rack, another tube pushed through the feed line and struck his gloved right ring fingertip. The sharp edge of the copper tube caused a soft tissue amputation to the bottom side of the fingertip.
An employee was cleaning slag from a casting mold at a furnace. The molten copper dropped out of the mold too quickly, reacted with the mold cooling water, and blew out. The molten metal struck his right foot, hand, and torso, causing first-, second-, and third-degree burns.
An employee was working with a drill press when his right glove was caught and pulled into the drill bit. The employee's little fingertip was partially amputated.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.