NEW YORK, NEW YORK—
Con Edison
Direct exposure to electricity, greater than 220 volts · Electrical burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Con Edison, W145 St and St Nicholas , NEW YORK, NEW YORK 10031 on — Electrical burns, unspecified, affecting the wrist(s).
Final narrative
An employee was in a manhole when he mis-stepped and lost his balance. His right hand then contacted an energized wire, causing an arc flash that burned his right wrist. He was hospitalized.
More severe injuries at Con Edison
NEW YORK, NEW YORK—
Con Edison
An employee used a ladder to descend into a sub-surface structure to investigate a possible leak. As he was stepping down his right foot became submerged in hot water inside a sump pit that was adjacent to the ladder. The employee sustained second-degree burns to his foot and ankle.
NEW YORK, NEW YORK—
CON EDISON
An employee was working in a two-person crew to address a steam leak from a flange. A wooden plug was placed into the flange to reduce and mitigate the leak in preparation for the job. The plug dislodged, and the resulting burst of steam burned the employee's right hand, leg, and face. The employee was hospitalized.
BAYSIDE, NEW YORK—
Con Edison
An employee became ill after repairing a gas valve in an excavation.
NEW YORK, NEW YORK—
Con Edison
An employee fell from a ladder and injured his right leg.
NEW YORK, NEW YORK—
CON EDISON
Two employees were assaulted by a fellow employee.
View Con Edison's full OSHA safety record →
Similar incidents · Same event type
S COFFEYVILLE, OKLAHOMA—
Star Pipe USA LLC
An employee was making modifications to an electrical panel when an arc flash occurred. The employee suffered burns to multiple parts of the body.
MIDLAND, TEXAS—
Star Electric Company of Texas
An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.
CLEARWATER, FLORIDA—
Powertown Line Construction LLC
An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.
WILLARD, OHIO—
Stanley Black and Decker, Inc
On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.
KERSEY, COLORADO—
Sun Valley Contractors, LLC
An employee had just turned off breakers and was loosening wires on panels when they were shocked by 480 volts of electricity.
More severe injuries in this industry (NAICS 221121)
SALMON, IDAHO—
QB Corporation
An employee was performing troubleshooting and maintenance on one of the generators that feed the RF line for glue-laminated timber (glulam) beam production. He was reattaching the outer panel of the generator. A circuit was completed and the employee was electrocuted by the generator and sustained burns. The employee was hospitalized.
PECOS, TEXAS—
Oncor Electric Delivery Company, LLC
An employee was utilizing a utility task vehicle (UTV) to patrol a 138 kV transmission line in a right-of-way. The UTV drove into a washout hole that was approximately 6 feet deep and obstructed by vegetation. The employee sustained a dislocated shoulder, a fractured left humerus, back pain, and a strained ankle. He was hospitalized.
CUSHING, MAINE—
Central Maine Power Company
A crew of employees were working to replace a utility pole that was broken by a motor vehicle accident. As the crew was removing equipment from the broken pole, part of the pole broke, fell on the injured employee, and rolled over him. The employee sustained two broken shoulders, multiple broken ribs, and a damaged lung that required hospitalization and surgery.
SPARTA, ILLINOIS—
Ameren Illinois - Sparta Operating Center
An Ameren lineman was making secondary voltage connections in a pad-mounted residential feed transformer. The lineman contacted an energized lead bushing, sustained an electrical shock, and was hospitalized.
BLACKSHEAR, GEORGIA—
Satilla EMC
An employee was checking voltage on a meter. There was an arc flash, and the employee suffered burns to both hands.
More severe injuries in NEW YORK
EAST HAMPTON, NEW YORK—
Garden Angels New York LLC
An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.
SYRACUSE, NEW YORK—
Cashless Tolling Constructors
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
BROOKLYN, NEW YORK—
NYU Langone Hospital-Brooklyn
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
CHEEKTOWAGA, NEW YORK—
Caraustar Industrial and Consumer Products Group Inc
An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.
CORNING, NEW YORK—
VILLAGER CONSTRUCTION, INC.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.