Struck by object falling from vehicle or machinery-other than vehicle part · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at SHOP VAC CORPORATION, 2323 REACH RD, WILLIAMSPORT, PENNSYLVANIA 17701
on — Cuts, lacerations, affecting the forearm(s).
Final narrative
An employee was working near a conveyor that carried totes of tank bottoms. Another employee stopped the upstream. The employee placed a tank bottom on the stopped conveyor and it fell off. The employee tried to catch it, and the tank bottom lacerated the employee's right inner forearm. The employee was hospitalized.
An employee was stacking columns of boxes. The boxes became unstable and began to fall. The employee attempted to get out of the way and tripped and fell to the floor, breaking their right hip.
An employee was approaching an injection molding machine when she tripped and fell from the floor level onto a conveyor, suffering a large hematoma to her upper left leg.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 333319)
An employee was wiping down the face of a large steel door on a piece of equipment. Their right hand was pinched between the hinge and the door frame as the door opened further. The employee sustained a fractured hand and required surgery.
An employee was sweeping trash when a stack of chuting material (6 feet x 3.5 feet) fell and struck their leg. The employee sustained a fractured femur.
An employee was assembling commercial kitchen products with a handheld nail gun when they tripped over the air hose reel while their finger was on the trigger. A nail was discharged into her left leg above the knee.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.