105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Great Plains Manufacturing

Caught in running equipment or machinery during regular operation · Amputations

Federal OSHA recorded a severe workplace injury at Great Plains Manufacturing , 1030 East North, SALINA, KANSAS 67401 on — Amputations, affecting the fingertip(s).

An employee was operating a shear and amputated a fingertip on their right hand.

Amputation Fingertip(s) Shearing machines

Great Plains Manufacturing

An employee was using a powered industrial truck (PIT) to move parts stored in totes inside a distribution warehouse. The employee knelt down to manually remove an empty tote from the forks of the PIT. The employee felt something pop in their back and was unable to get up. The employee was hospitalized with bulging discs in their lower back.

Great Plains Manufacturing

Employees were stacking equipment onto storage racks when a rack shifted and an employee's right hand was caught between racks. The employee sustained fractures to the hand, and their right index finger was partially amputated.

Great Plains Manufacturing

An employee was welding parts together. The lead welding wire punctured the employee's left knee. The employee was hospitalized.

Great Plains Manufacturing

An employee was using a horizontal saw to cut tubes. The saw cut about 1/8 inch off the tip off his left middle finger.

Great Plains Manufacturing

An employee was using a press to bend a piece to a 90-degree angle. When the die came down, the piece did not bend 90 percent as it was supposed to, so the employee lifted the die, held the piece with both hands, and activated the press with the foot pedal. The press die then amputated the employee's thumbs from the middle of the nail to the tip.

View Great Plains Manufacturing 's full OSHA safety record →

Pall Corporation

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

Koch Foods of Cincinnati

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

Stella-Jones Corporation

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

Mack Manufacturing, Inc.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

Nutmeg Container Corporation

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

King Kutter, Inc.

An employee was welding lift arms when their shirt caught fire due to welding sparks or heat, resulting in thermal burns to their upper chest.

White Star Machinery

An employee was climbing up a fixed ladder alongside a building to inspect a roof leak. The employee fell off the ladder and landed on the ground about 15 feet below. The employee was hospitalized with fractures to both wrists.

Great Plains Manufacturing Inc.

On September 16, 2025, an employee went to pull a weld stand when he tripped and fell, landing on the floor on his right hip. The employee suffered hip and fibula fractures that required hospitalization and surgery.

Lindsay Irrigation Solutions, LLC

An employee was accessing a tensioned hook that required a hoist mechanism to be engaged. He was unhooking the lift hook from a shelf column when the "up" button was pressed, which released the tension on the pneumatic air hoist. The employee's right index finger was caught between the hook and the column, resulting in a soft tissue amputation and fracture to the fingertip.

T-L IRRIGATION CO.

A crane was lifting a pole out of a zinc bath in the galvanizing department when the chain attached to the pole broke. The pole fell back into the bath and liquid zinc splashed onto an employee, who suffered third-degree burns to an arm, the abdomen, the torso, the upper left side of the chest, an ear, the neck, and a hand.

Omya Inc.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

John Deere Coffeyville Works

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

Haven Steel Products Inc

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Vestas-American Wind Tech

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

Alliance Ag and Grain LLC

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.