Miller Mechanical Services, Inc.

An employee was making modifications to an electrical panel when an arc flash occurred. The employee suffered burns to multiple parts of the body.

An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.

An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.

On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.

An employee had just turned off breakers and was loosening wires on panels when they were shocked by 480 volts of electricity.

An employee was standing on a 10-inch high working platform (36.75"x24"x10") verifying that tanks were being picked up properly by an overhead conveyor. The employee turned and was stepping off the platform when their left work boot caught the edge of the platform. The employee fell to the concrete floor and landed on their right side. The employee's right hip was fractured.

An employee was working on a vessel, attaching the base plate ring to the legs, when the base plate shifted about 3 inches. The employee's right foot became pinned between the base plate and the floor. Three toes were crushed. The employee was hospitalized and required surgery, resulting in partial amputation of their toe tips.

Two employees were constructing a 30-foot-tall aboveground storage tank, fitting a double roof on the tank. Half of the roof had been stitch-welded to the tank, and the employees were fitting/tacking down the second half of the roof, when the roof shifted and fell in. One employee fell and sustained fractures to their right foot and shin. The second employee suffered a broken back. Both employees required hospitalization.

An employee was removing stretch wrap from between shipping pallets when she tripped/stumbled and fell, resulting in a fractured hip.

Two employees engaged in a verbal altercation. The injured employee was punched in the face and fell, hitting their head on the concrete floor. The employee sustained a brain bleed and blunt force trauma to the face.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.