Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Genpak, LLC, 1101 W. Harrison Rd., LONGVIEW, TEXAS 75604
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was helping start up an extruder, pulling the sheet over the mandrel for string-up. The sheet bunched up on the bar of the mandrel blade, and the blade amputated the employee's right middle fingertip.
An employee had just replaced a belt on a silo blower. While the employee was testing the blower by manually turning the belt, the belt and pulley caught the employee's fingertip. The fingertip was amputated.
The regrind system malfunctioned, due to clogged resin. An employee went to the blend room to assess the issue. Once resin was flowing again, the employee was exiting the platform using a ladder and, having residual resin dust on gloves, his hand slipped off the ladder causing him to lose his footing and fall to floor. The employee suffered a knee fracture.
An employee was using a tape measure to gauge the width of a plastic sheet as it went into an oven. The tape measure got caught on the sheet and was pulled in. The employee was caught between the sheet and the idle roller, suffering a cut to the arm.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 424130)
An semi-truck was backing into a loading dock when it struck an employee who was walking on the bay floor. The trailer pinned the employee against the dock bumper. The employee suffered crushing injuries and was hospitalized.
Employees were unloading a box truck using a stand-up lift with pallet fork extenders. As the stand-up lift traveled up an incline, it struck a parked sit-down lift and the injured employee's left ankle was pinched between the lifts, resulting in lacerations and an ankle fracture. The employee was hospitalized.
An employee had just replaced a belt on a silo blower. While the employee was testing the blower by manually turning the belt, the belt and pulley caught the employee's fingertip. The fingertip was amputated.
An employee was setting up the coding station on a piece of equipment when they took a step back and tripped on a guard that was on the floor. The employee fell onto one leg, resulting in a left hip fracture. The employee was hospitalized and required surgery.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.