Caught in running equipment or machinery during regular operation · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Genpak, LLC, 505 E. Cotton Street, CARTHAGE, TEXAS 75633
on — Cuts, lacerations, affecting the arm(s), unspecified.
Final narrative
An employee was using a tape measure to gauge the width of a plastic sheet as it went into an oven. The tape measure got caught on the sheet and was pulled in. The employee was caught between the sheet and the idle roller, suffering a cut to the arm.
An employee had just replaced a belt on a silo blower. While the employee was testing the blower by manually turning the belt, the belt and pulley caught the employee's fingertip. The fingertip was amputated.
The regrind system malfunctioned, due to clogged resin. An employee went to the blend room to assess the issue. Once resin was flowing again, the employee was exiting the platform using a ladder and, having residual resin dust on gloves, his hand slipped off the ladder causing him to lose his footing and fall to floor. The employee suffered a knee fracture.
An employee was helping start up an extruder, pulling the sheet over the mandrel for string-up. The sheet bunched up on the bar of the mandrel blade, and the blade amputated the employee's right middle fingertip.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326199)
An employee was operating a drill and tap machine. He was placing a part with his right hand and removing a part coming in on the left side. He saw a part that was crooked and went to straighten it. The machine clamped down on his left index finger, degloving the top part of the finger and resulting in a partial amputation.
An employee was performing maintenance on a roll cutting machine in a warehouse. The employee was removing excess grease from the bearings when the machine's chain caught their right index finger. The fingertip was amputated by the chain and sprocket.
During fiberglass work, an employee mixed a methyl ethyl ketone peroxide (MEKP) catalyst with a cobalt chemical that they thought was a dye. A chemical reaction occurred, resulting in an explosion. The employee sustained second-degree burns on his back and a blister on his right arm.
An employee was walking when she tripped over a box on the ground and fell. The employee was hospitalized with a severe dislocation to the hip and leg that required surgery.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.