FORT MORGAN, COLORADO—
CARGILL MEAT SOLUTIONS CORPORATION
Nonroadway collision with object other than vehicle, unspecified · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury at CARGILL MEAT SOLUTIONS CORPORATION, 1505 E. BURLINGTON AVENUE, FORT MORGAN, COLORADO 80701 on — Cuts, lacerations, affecting the elbow(s).
Final narrative
An employee was operating a forklift when the side of the forklift came in contact with a guard that was protecting a piece of equipment. The guard snapped and hit the employee in the elbow resulting in a laceration. The employee was hospitalized.
More severe injuries at CARGILL MEAT SOLUTIONS CORPORATION
DODGE CITY, KANSAS—
Cargill Meat Solutions Corporation
A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.
BUTLER, WISCONSIN—
Cargill Meat Solutions Corporation
A conveyor drive had been strapped to a lift for removal. As the drive was removed, the strap holding it shifted, causing it to swing. An employee's right hand was caught between the swinging drive and the frame of the conveyor, and the last joint of the little finger was amputated.
SCHUYLER, NEBRASKA—
Cargill Meat Solutions Corporation
An employee was unjamming a box coming from a case sealer when their right hand was caught in a conveyor belt. Their middle and ring fingers sustained amputations to the second knuckle.
SCHUYLER, NEBRASKA—
Cargill Meat Solutions Corporation
An employee had finished sharpening a knife on the grinding wheel and was returning it when he lost grip of the handle. As the employee reached to catch the it, his abdomen was lacerated by the knife blade in the right lower quadrant.
NORTH KINGSTOWN, RHODE ISLAND—
Cargill Meat Solutions Corporation
An employee was staging product on the shipping dock while operating a lift truck. As the employee was driving from the shipping dock to the finished goods warehouse, the lift controls began malfunctioning. The vehicle collided with a bollard and the employee's leg was caught between it and the vehicle, resulting in multiple leg, ankle, and foot fractures.
View CARGILL MEAT SOLUTIONS CORPORATION's full OSHA safety record →
Similar incidents · Same event type
JACKSONVILLE, FLORIDA—
Coach Distribution Center
On October 25, 2023, an employee was in the warehouse driving a forklift toward the dock door. The forklift struck a conveyor belt and the employee sustained broken ribs.
PITTSBURGH, PENNSYLVANIA—
FedEx Supply Chain
An employee was operating an electric pallet jack when it struck a stanchion. The employee sustained fractures to the right chest and right ankle.
MIAMI, FLORIDA—
Cargo Handling Airport Services , LLC
An employee was operating a forklift when the vehicle collided with a wall. His right foot struck the wall, resulting in three fractures in his foot.
DAYTONA BEACH, FLORIDA—
Pepsi - Daytona Beach
An employee was using a walkie-rider to load a trailer. As she turned a corner, the walkie-rider struck the trailer and the employee was thrown to the ground. She was hospitalized with a fractured left leg.
FISHKILL, NEW YORK—
GAP, INC.
An employee was driving a forklift and struck a pole, resulting in a broken left ankle.
More severe injuries in this industry (NAICS 311611)
AMARILLO, TEXAS—
Tyson Fresh Meats, Inc.
An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.
IDAHO FALLS, IDAHO—
Intermountain Packing, LLC
An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.
DODGE CITY, KANSAS—
Cargill Meat Solutions Corporation
A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.
SOUDERTON, PENNSYLVANIA—
JBS Souderton, Inc.
The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.
CRETE, NEBRASKA—
Smithfield Foods
An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.
More severe injuries in COLORADO
GREELEY, COLORADO—
ABC Supply Company
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
BOULDER, COLORADO—
Burke Builders Inc
An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.
LONGMONT, COLORADO—
Circle Graphics, Inc.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
DENVER, COLORADO—
FLATIRON CONSTRUCTION CORP.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
BURLINGTON, COLORADO—
Takkion OPS Management
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.