Other fall to lower level 11 to 15 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at B&B MICRO MANUFACTURING, INC., 201 Howland Ave, NORTH ADAMS, MASSACHUSETTS 01247
on — Fractures, affecting the ankle(s).
Final narrative
An employee was installing plywood on a roof. The plywood was staged on forklift forks that were raised approximately 12 feet. The employee climbed from the roof onto the forks of the forklift to retrieve the plywood. The employee was kneeling on the stack of plywood when it fell to the ground. The employee fell with the plywood approximately 12 feet onto concrete, requiring hospitalization for a fractured left ankle.
HospitalizedAnkle(s)Forklift, order picker, platform truck-powered
The employee was on top of a rail car to level the grain that was deposited into the car when they fell 13-15 feet to the ground. The employee sustained a right leg fracture.
An employee was on an extension ladder installing a satellite dish on a roof when they fell approximately 12-15 feet to the ground. The employee sustained fractures.
An employee was setting a 5-foot pry bar into a precast concrete slab and stood on the end of the pry bar to move the slab into place. The pry bar slipped out causing the employee to fall backward 15.5 feet to the dirt ground. The employee was hospitalized with a broken leg.
An employee was on a step ladder to measure and mark a crane rail for modification. The employee fell approximately 12 to 15 feet to the ground, resulting in a fractured right hip.
An employee was on a trailer securing a load of logs when they fell approximately 9-12 feet to the ground. The employee sustained brain hemorrhaging and lacerations to the thigh and above the eye. The employee was hospitalized.
More severe injuries in this industry (NAICS 336214)
An employee was working to dislodge a small piece of wood that had become stuck in a wood molder. The employee's glove became entangled in the machine's cutter head and the employee suffered a partial amputation to a finger on the right hand.
An employee was rolling a piece of structural channel on a roller table when the channel collided with steel tubing that was sitting on the roller table. One of the employee's fingers was hanging down over the piece of channel, and when it collided with the tube, their fingertip was severed. Approximately half of an inch of the employee's fingertip was amputated.
On November 21, 2024, an employee was operating a punch press running stone guard brackets. The press cycled while they were placing a part into the die, crushing their right hand. The employee was hospitalized with crushing injuries to their ring finger and an amputation of the little fingertip, and they required surgery.
An employee was inspecting and photographing a trailer unit when his left index finger was pinched between a hardware bar and the floor, resulting in a partial amputation.
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.