Struck by rolling object or equipment being pushed by injured worker · Traumatic injuries and disorders, n.e.c.
At a glance
Federal OSHA recorded a severe workplace injury
at Cooper Tire & Rubber Company, 3500 E Washington St, TEXARKANA, ARKANSAS 71854
on — Traumatic injuries and disorders, n.e.c., affecting the lower leg(s).
Final narrative
On August 28, 2019, around 3:30 PM, an employee was pulling a 500-pound cart by hand when he backed into a low guardrail that was approximately 1.5 feet tall. The cart then impacted his leg at the calf and shin. The next day, his calf became swollen and blackish, requiring hospitalization and surgery for a muscle injury.
HospitalizedLower leg(s)Cart, dolly, hand truck-nonpowered
More severe injuries at Cooper Tire & Rubber Company
An employee was pushing an empty metal skid onto a skid conveyor. His right index finger was pinched between the skid and the skid holder, and the fingertip was amputated.
An employee was working underneath a creel calender machine, using a tool to straighten/comb wires as they enter the creel. The employee's tool contacted a pressure roller and was pulled into a pinch point along with the employee's right hand resulting in amputations to the right thumb tip, and two other fingertips.
An employee was driving a tugger, connected to a full tread cart, down an aisle. The front right corner of the cart contacted the blunt end of a guardrail. The tugger turned sharply and stopped, causing the employee to fall off and strike his face on the guardrail. He suffered fractures to the cheek and around the eye.
An employee reached to grab rubber in a conveyor belt and their arm was caught in the belt, resulting in a fractured forearm and a right index finger injury.
An employee was removing a piece of rubber from a transfer belt when the employee's right arm was caught in the conveyor, fracturing the right forearm.
An employee was taking a trash cart to a dumpster when one of their fingers was pinched between the trash cart and the dumpster, resulting in a partial amputation.
An employee was pushing flat shopping carts back into the cart tunnel. When unjamming the carts, part of the cart struck the employee's left shin, resulting in a laceration and bleeding. The employee was hospitalized.
An employee was pulling a cart backward in a storage area when his right little finger was pinched between the cart frame and an electrical box mounted to the side of a support column. The employee's right little finger was partially amputated.
An employee was helping to push a welding trailer out of the path of a truck. The trailer then rolled over a half-inch elevation change that rocked the trailer toward an electrical box. The employee's finger was pinched between the welding trailer and electrical box, resulting in a finger amputation approximately 1/2-inch from the end.
An employee was unloading packages from a trailer onto a cart. While moving the cart, it struck the employee's heel causing a tear to their Achilles muscle. The employee required surgery.
More severe injuries in this industry (NAICS 326211)
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was adjusting a pallet on a conveyor when it came off the conveyor and struck his right ankle, breaking the tibia and fibula. The employee was hospitalized.
At 2:45 p.m., an employee was outside the plant during a break before his next shift. He was speaking with an associate when he suddenly fell from the third-level steps to the ground, striking his head on the concrete. The employee was hospitalized due to internal brain bleeding, a wound to the back of his head requiring staples, and heat-related dehydration.
Two employees were replacing a motor on an overhead conveyor. The old motor fell to the floor, causing a piece of the concrete floor to fly up and strike the injured employee in the face, around the eye. The injured employee sustained a right orbital fracture, a zygomatic arch fracture, and a sphenoid fracture. The employee was hospitalized and required surgery.
An employee was changing the bladder on a hydraulic press. As he lowered the bladder, his left foot was pinned between its bottom ring and the bottom mold of the press. The second toe on the foot was amputated.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.