Caught in or compressed by equipment or objects, unspecified · Avulsions, enucleations
At a glance
Federal OSHA recorded a severe workplace injury
at ENDICOTT CLAY PRODUCTS CO., 57120 707 ROAD, ENDICOTT, NEBRASKA 68350
on — Avulsions, enucleations, affecting the finger(s), fingernail(s), unspecified.
Watch Endicott Clay Products CO. — freeGet an email when a new federal OSHA severe-injury report for Endicott Clay Products CO. is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was working on a conveyor belt assembly. The employee's finger was caught by a belt and hit a pulley, causing an avulsion to the left index finger.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 327121)
An employee was operating a slab line in a plant that produces 16" x 9" x 3" concrete slabs that weigh approximately 25-30 pounds. The employee went to adjust the chain and sprocket for the doubler that stacks the slabs two high, when their right middle finger was caught in the machine. The employee sustained a partial transphalangeal amputation of the finger.
An employee was packaging brick. A brick broke from the bundle and became lodged between the conveyor rollers. The employee was removing the brick when the bundle of brick shifted forward, catching his left index finger between the bundle and the conveyor roller and resulting in a partial amputation to the fingertip.
An employee was observing the operation of the stacker machine and climbed onto a platform to align bricks in the stacker. While the employee was on the platform, the machine cycled, striking and pinning him to the chain conveyor. The employee suffered abrasions on his arms and hairline fractures of his pelvis.
An employee was picking up broken bricks from the floor to throw into a hopper. A forklift reversed, and its counterweight struck the employee. The employee suffered a broken left foot, as well as injuries to the leg and ankle, and was hospitalized.
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.