Compressed or pinched by shifting objects or equipment · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at HUBBARD CONSTRUCTION COMPANY, Orlando Paving Compant, APOPKA, FLORIDA 32703
on — Fractures, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was operating an aerial lift to perform maintenance on a plant lime silo when he made contact with the silo support brace. During this contact, his right index finger was pinched between the top rail of the lift and the support brace, resulting in a laceration and break of the first knuckle.
An employee was placing a securing pin into a trench box. The pin slipped, pinching his right gloved hand in the cylinder. His thumb was broken and he was hospitalized.
An asphalt roller was moving from a staging area to the back of a paver when it slid on the tacked surface. It came to rest against the paver, pinning an employee who had been spotting dump trucks and collecting asphalt load-out tickets from the drivers. The employee suffered a broken pelvis, six broken ribs, and a bruised bladder and was hospitalized.
On March 27, 2023, an employee fell from the back of a traffic truck while it was performing a U-turn. The employee landed on the ground and sustained injury to the neck and back.
An employee was putting tools away and performing housekeeping tasks next to a grapple truck. The employee's foot was under the outrigger as it was lowering, resulting in a crush injury.
An employee was cutting an 8-inch PVC pipe with a saw. When the saw cut through the pipe, both ends of the pipe came together and pinched the saw's blade. The saw kicked back and lacerated the employee's chest. The employee had surgery to clean the wound.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 237310)
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.