Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at National Beef Packing Co. LLC., 2000 E. Trail St., DODGE CITY, KANSAS 67801
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was replacing a chain when their finger got caught in a chain hole. The chain then moved and crushed the employee's finger resulting in amputation of the right index finger.
An employee was walking alongside a conveyor when she stepped on a conduit on the ground, causing her to slip and fall onto the conveyor belt. She was hospitalized with bruised and fractured ribs.
An employee was unclogging a drain with a water hose when it backwashed on him. There was residue of a cleaning agent in the drain that caused burns to his arms, right knee, face, and eyes.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 311613)
A temporary employee was working to unclog butter from a butter melter pump. His right index finger was caught in the machine, and the fingertip was amputated. The machine was energized at the time.
An employee working at the reject conveyor was placing a product guide bar on the conveyor. This metal guide bar is placed on the side of the conveyor belt to funnel the product, preventing it from falling off the sides. As he was getting the attachment positioned, his left ring finger was caught between the conveyor belt and the conveyor belt frame. The employee's finger was fractured and partially amputated.
An employee was using a pneumatic impact wrench to tighten bolts on a brake press anvil. The impact wrench hooked up on something, causing the tool to rotate. This spun his left hand with it. Their index finger was pinched between the side handle of the tool and an anvil bolt on the press, resulting in an open fracture. The employee required a medical amputation of the fingertip.
An employee was cleaning the area under a mobile elevated work platform. The platform lowered and struck the employee, resulting in a fractured right femur. The employee was hospitalized.
As an employee was opening an infeed valve. Hot tallow oil in the line above fell back down the pipe and came out of an open pressure relief valve, striking the employee on the thighs. The employee was hospitalized with second-degree burns to his thigh. Another employee sustained burns to their back but they were not hospitalized.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.