ALMA, GEORGIA—
Titan Modular Systems, Inc.
Direct exposure to electricity, greater than 220 volts · Second degree electrical burns
At a glance
Federal OSHA recorded a severe workplace injury at Titan Modular Systems, Inc., 162 Industrial Drive, ALMA, GEORGIA 31510 on — Second degree electrical burns, affecting the forearm(s).
Watch Titan Modular Systems, Inc. — free
Get an email when a new federal OSHA severe-injury report for Titan Modular Systems, Inc. is published. One employer, no account, unsubscribe in one click.
Final narrative
A maintenance employee made contact with an energized conductor when he was in the process of removing a bolt inside an electrical box (240 volts) with a wrench. This action induced an arc flash. The employee sustained first degree burns to both hands and second degree burns to his left forearm.
More severe injuries at Titan Modular Systems, Inc.
ALMA, GEORGIA—
Titan Modular Systems, Inc.
An employee was using a line roller to move units (module). The hitch was placed on the ball and it slipped. The front piece of the hitch that was attached to the module got caught and the unit crushed his right index finger. He sustained a partial finger amputation.
ALMA, GEORGIA—
TITAN MODULAR SYSTEMS, INC.
An employee was using a table saw to cut a piece of wood when the wood became jammed. As the employee went to move the wood, his right index finger was lacerated by the blade. The employee was hospitalized.
ALMA, GEORGIA—
Titan Modular Systems, Inc.
An employee was operating a staple gun and sustained injuries to the left thumb requiring surgery. The employee was hospitalized.
View Titan Modular Systems, Inc.'s full OSHA safety record →
Similar incidents · Same event type
S COFFEYVILLE, OKLAHOMA—
Star Pipe USA LLC
An employee was making modifications to an electrical panel when an arc flash occurred. The employee suffered burns to multiple parts of the body.
MIDLAND, TEXAS—
Star Electric Company of Texas
An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.
CLEARWATER, FLORIDA—
Powertown Line Construction LLC
An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.
WILLARD, OHIO—
Stanley Black and Decker, Inc
On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.
KERSEY, COLORADO—
Sun Valley Contractors, LLC
An employee had just turned off breakers and was loosening wires on panels when they were shocked by 480 volts of electricity.
More severe injuries in this industry (NAICS 321991)
RUSSELLVILLE, ALABAMA—
Southern Energy Homes, Inc.
On September 5, 2025, an employee was installing gang plates on a structure when the side walls fell and hit her head. She then fell onto her back and the side wall pressed her to the ground, resulting in hospitalization due to an ilium fracture and a transverse process fracture on the right side.
DUNCAN, OKLAHOMA—
Cavco - Duncan
An employee was blowing cellulose insulation into the open attic area of a manufactured home. While the employee was holding the insulation hose, it caught on the guardrail of the catwalk/suspended walkway leading into the attic. The tugging motion caused the employee to lose their footing and step onto the sheetrock ceiling. The employee fell through the ceiling to the ground about 8 feet below and suffered a broken lower left leg. The employee was hospitalized.
BROXTON, GEORGIA—
WMT Housing, LLC
An employee was going between a ladder and a wall to repair a wall in the utility room. A brad-nailing gun was hanging on a piece of wood on the side of the ladder. The employee contacted the brad nailer and the trigger was pushed into the wooden piece. The brad-nailing gun actuated and shot a 2-inch brad into the employee's abdomen.
BRECKENRIDGE, TEXAS—
RGN Manufacturing Services, PLLC
An employee was on a scaffold caulking and painting a manufactured home. She fell off the scaffold an estimated 6 to 8 feet, landing on the concrete floor. The employee suffered upper body injuries and was hospitalized.
OCALA, FLORIDA—
SOUTHERN STRUCTURES INCORPORATED
An employee was going up a ladder from the first level roof to the second level roof. The ladder slipped and the employee fell approximately 8 to 10 feet to the surface on the first level. The employee sustained fractures to three ribs and bruises on their arms and hands.
More severe injuries in GEORGIA
PEACHTREE CITY, GEORGIA—
GS II Building Products, Inc.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
AUGUSTA, GEORGIA—
US Battery Manufacturing Company, Inc
A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.
CARTERSVILLE, GEORGIA—
Alfa Insurance
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
ATLANTA, GEORGIA—
EMORY UNIVERSITY HOSPITAL
An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.
TRENTON, GEORGIA—
Bull Moose Tube
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.