Fincantieri Marine Group, LLC

An employee was utilizing a 20-ton overhead crane to place a steel insert into the hull of a ship. The employee attached the crane to the pad eye and began lifting the steel plate. The pad eye failed, releasing from the steel plate and causing it to strike the employee. They sustained a laceration to the right side of the face/head, requiring hospitalization.

An employee was operating a steel roller machine. The rollers caught the employee's glove. The machine stopped. When it was reactivated, it pulled in and partially amputated the employee's right index finger.

An employee was walking down a ship's ladder carrying an 8-foot-long scaffold pole. Her foot slipped on the wet steps of the ship's ladder and she fell 6-7 feet, striking several metal surfaces. The employee suffered a scalp laceration, four broken ribs, and fractures to three vertebrae in her lower back.

An employee was stepping off of a 24" tall platform when he fell and landed on a 1" steel pipe, suffering fractured ribs and a perforated lung.

An employee was repairing an abrasive blasting pressure pot. The employee turned off the blasting machine before leaving the area to get a different tool. While the employee was away, a coworker turned the machine back on. When the employee returned to continue work, the coworker triggered the system, striking the employee with pressurized blast media. The employee suffered a serious abrasion and punctures to the face, neck, torso, arms, and leg, requiring hospitalization. The machine was not locked/tagged out at the time of the incident.

An employee was installing wood trim surrounding a skylight inside a home. While holding a piece of trim in it's desired location, his pneumatic nail gun discharged, sending a 3/4-inch pin nail into his left forearm.

An employee removed a safety valve on a trailer that unknowingly contained nitrogen gas. The gas released from the trailer and pushed the employee backward off a scaffold approximately 10 feet before they struck a garage door, resulting in a pelvic injury.

An employee was sitting at her workstation when a nail gun malfunctioned and shot a nail into her left leg. She suffered a puncture and blood vessel injury and was hospitalized.

On November 25, 2023, an employee was using a high-pressured water hose to perform sewer line cleaning operations. The employee's right little finger and palm were lacerated by pressurized water from the hose.

An employee was hydroblasting when they slipped and the pressurized water stream lacerated their left ankle.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was struck by a plasma cutter and suffered a broken left tibia and fibula. The employee was hospitalized.

An employee was preparing to bend a flat bar in a brake press. When the machine was jogged, the stock rotated up and crushed his left middle fingertip against the outer frame of the die. The fingertip was amputated.

An employee was cutting metal with a torch. A piece of metal struck the employee's left foot, causing multiple fractures to metatarsal(s). The employee was hospitalized.

An employee was descending a ladder carrying a bag of trash. He fell, landed on the ground about 10 feet below, and suffered fractures to his right hip and pelvis.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.