Struck or run over by rolling powered vehicle · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at SAFEWAY DISTRIBUTION CENTER, 4600 E. STAPLETON DRIVE SOUTH, DENVER, COLORADO 80216
on — Cuts, lacerations, affecting the foot (feet), unspecified.
Final narrative
An employee stepped off an electric pallet jack and it cut her foot.
An employee was in an aerial lift when he contacted a 13.2 kV power line with his back. He was shocked and suffered second- and third-degree burns to the back.
An employee was using a powered industrial truck to load a pallet into a trailer when the employee's leg was caught and fractured between the truck and a pillar. The employee was hospitalized.
On December 26, 2023, an employee went out to the parking lot to troubleshoot the starter of an SUV. The employee was underneath the vehicle when it started and moved and the employee's middle back area was caught under the front passenger-side tire. The employee sustained a fractured collar bone.
An employee was parking at a patient's home and exited the van to manually open the garage door. The van began rolling backward and rolled over the employee's right leg. She was hospitalized with a fractured leg.
A driver exited their truck so they could provide service for a customer when the truck began to roll away. The driver went to re-enter the truck but fell and was struck by the rear driver-side tire. The employee sustained fractures to their leg and foot.
An employee had been operating a yard tractor. He parked the vehicle and was exiting when the vehicle began to roll, causing him to fall. The employee's hand was then run over by the yard tractor, resulting in fractures to multiple fingers. The employee was hospitalized.
An employee was checking for a leak in the air brake system of a semi-truck. The employee had removed the brake chamber when the truck rolled back. One of the tires pinned the employee's right hip against the ground.
More severe injuries in this industry (NAICS 493120)
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a double pallet jack. While he was pushing a pallet back, the pallet jack moved and the handle crushed his finger against racking.
An employee was offloading tools from a van and walking them over to the curb. He lost his footing and fell while carrying a jackhammer. The jackhammer fell and caught the employee's right little finger against the curb. The employee's finger was amputated.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.