Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Zachry Industrial, Inc., 1230 Independence Pkwy, LA PORTE, TEXAS 77571
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was working to fit two 1-1/2-inch stainless steel spool pieces at a flanged connection to bolt up.
To align the two spool pieces, the top section of pipe (10 feet in length) was rigged using a nylon strap choker, attached to a 1/2-ton chain.
As the employee attempted to move the pipe, the load shifted in the nylon strap, causing the top section of the pipe to drop approximately 1-2 inches, which pinched the injured employee's left index finger in the flanged connection and resulted in an amputation of the finger's distal tip.
An employee was walking on site when he tripped on a wooden survey stake that was lying flat on the ground. He fell into another employee and sustained a fracture to the tibia/fibula.
An employee was working on top of a rebar mat that was about 4 feet off the ground. As he walked across the mat, he stepped into a gap and his lower leg was caught in the rebar. His right leg twisted, and he suffered fractures to the tibia and fibula. He was hospitalized.
A Zachry Industrial employee was pushing a cart up a walkway. A forklift struck the employee as it finished turning around, its back right wheel hitting the employee's left foot and causing multiple fractures.
An employee was welding the bottom of a chute on the underside of a bin. Hot material came through a small gap between a gate inside the bin and the chute, contacting the employee below. The employee received second and third burns to the neck.
An employee was climbing a 12'8" permanent fixed ladder when he fell to the ground, landing on his left side. He suffered a fractured radius, fractured tail bone, fractured lower vertebrae, and internal bleeding.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 541420)
Employees were using a forklift equipped with four wire slings to move a 20-foot by 6-foot roofing panel from the work area to the laydown yard. The slings were threaded through the forklift's forks (two slings per fork), and the other ends were secured to the panel with shackles. The forklift was reversing through a bay door opening and the injured employee was applying pressure to a corner of the panel so it would fit through the opening. The load shifted, causing a sling to slide off a fork. The roof panel then fell onto the injured employee's left foot, resulting in a fractured ankle.
Two employees were using a scissor lift to install a sign when a gust of wind knocked the scissor lift over. One of the employees fell to the ground, resulting in a broken left shoulder and left hip.
An employee was using a drill press to bore a piece of wood. The drill bit caught the glove on his left hand, resulting in the amputation of his left thumb.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.