Finzer Roller, Inc.

An employee was pushing a cart holding 10 steel cores vertically. The cores were 44" high, 1" in diameter with a 1/4" keyway, and they weighed 10 pounds each. He stopped the cart which caused three of the cores to fall. The keyway of one the shafts fell onto his right middle finger that was resting on the cart and it amputated the fingertip.

An employee was removing a roller weighing approximately 1000 pounds from the laser inspection lathe using a spreader bar with two wire-rope slings. The employee was using the lifting device and attaching the cable strap sling to the two journals of the roller so that she could use the hoist to move the roller to a box. When she raised the hoist to make the sling taut, her right index finger was caught between the sling and the roller. The employee suffered an amputation of her index finger to the distal knuckle.

An employee was using a CNC lathe to finish-grind a small urethane roll. His right hand contacted the rotating grinding wheel and was pulled in. He suffered amputations to the ring fingertip (at the first knuckle) and the middle finger (at the second knuckle).

An employee was operating a bar spinner machine when he noticed that it was not moving back and forth smoothly. The employee went under the machine while troubleshooting to look at how it was traveling along the rails. As the employee went to stand up, his hand came in contact with the machine while the spindle was still in motion, resulting in an amputation of the right index finger above the first knuckle.

An employee was operating a band saw when his right little fingertip was amputated.

An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.

An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.

An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.

An employee was using a shaper to cut wood when their right hand contacted the blade, resulting in a partial amputation to the right ring finger.

An employee was guiding a conveyor belt through a slitter when their hand was caught between the rollers and the table. When the employee pulled their hand out, the glove was left behind and their right middle fingertip was amputated.

A maintenance employee was working to place a 120-pound metal screen on top of a machine before installation, with the help of another employee. The injured employee's right ring finger was pinched between the screen and the machine and the fingertip was partially amputated.

On September 26, 2025, an employee was performing maintenance on an excavator when a bale of rubber fell from an adjacent rack and struck him. The employee sustained multiple fractures to his pelvic area.

An employee was cleaning a mixer door. The employee's left hand came into contact with the mixer blade, which was still slowly rotating. The employee suffered amputations to the left index and middle fingertips.

A temporary employee was working to remove a detached piece of rubber EPDM product that was hanging on the outside of a feed chute. As the employee grabbed the elongated material, the material reengaged inside the machine above the feed chute and pulled back, pinching their left index fingertip. The employee's fingertip was amputated.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.